I have some wood left over from building a patio, mainly some planks. Normally when I'm creating firewood, I just use an axe a split the wood, but these are too long for that. I really don't want to ...
I intend on using a band saw to cut out large meeples (the wooden pieces from the board game Carcassonne) from a 2x4 board. I'm worried about cutting my fingers. What tool can I use to help keep ...
I'm going to be cutting 1x6 oak planks with a miter saw, but I'm not sure what blade to use. I currently have a 24T blade in the saw (which I know for sure I don't want to use), since I usually use it ...
I'm scheming to reface my kitchen cabinets with sustainable lumber (looking for FSC certified or salvage) and trying to figure out what my options are. Our existing hinges aren't much different from ...
I've been applying some adhesive-backed veneer to some shop cabinets just to get some practice since I've never done it before. Didn't have much trouble getting it on, but trimming it has been another ...
I'm going to be joining 2 1x6" pieces of wood at a simple miter joint. However, I want the top edges to be rounded over. I'm planning to use my router and a round over bit to soften the edges, the ...
I'd like to build a largish (6' x 7' x 4') structure that can be assembled and disassembled on-site with only hand tools. I'm thinking about things like insert nuts, cam lock nuts, mortise/tenon ...
I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...