The woodworking tag has no wiki summary.
4
votes
1answer
226 views
Why does some polyurethane need to be wiped off, and what happens if I don't?
So, I stupidly applied some polyurethane to my project without reading the instructions on the can. After it was dry several hours later, I finally read the instructions, and to my horror, I saw it ...
6
votes
1answer
705 views
Why do we need multiple coatings of polyurethane?
I just finished my first wood-working project ever, and applied the first layer of polyurethane last night. This morning, it looks beautiful. So I have a few questions:
Do I need a second (or more) ...
9
votes
1answer
257 views
What is the recommended number of teeth for making finish cuts with a miter saw?
I'm going to be cutting 1x6 oak planks with a miter saw, but I'm not sure what blade to use. I currently have a 24T blade in the saw (which I know for sure I don't want to use), since I usually use it ...
3
votes
1answer
249 views
When should I round over the edges leading to a miter joint?
I'm going to be joining 2 1x6" pieces of wood at a simple miter joint.
However, I want the top edges to be rounded over. I'm planning to use my router and a round over bit to soften the edges, the ...
6
votes
1answer
171 views
While building a bed frame, at what point should I start worring about cross beams?
So, I've made this bedframe that's rather tall, the frame is 32" off the ground, and the legs are each bolted on with two 3/8" bolts running perpendicular, and horizontally.
Having not actually used ...
7
votes
1answer
436 views
Cutting a Custom Threshold: Best Tool for the Job?
I am in the process of creating a custom threshold to go from a tiled surface down to a carpeted surface. The tile is about an inch above the carpeted floor, so I decided to make a custom threshold in ...
3
votes
2answers
1k views
How can I make trapezoid-shaped wood board (beveled edges)?
The reason why I want this is somewhat difficult to explain. I basically am looking for moulding-sized planks that have a trapezoid shape like this:
That's the best trapezoid shape I could find, ...
1
vote
2answers
481 views
Is there software that can optimally determine how to cut sheets of plywood for a project?
I want to build some porch planters out of sheets of plywood, but I'm trying to minimize the number of sheets of plywood I buy.
Is there software that will let me enter all my planter designs and ...
20
votes
4answers
1k views
What is the best tool for cutting up scrap wood?
I have some wood left over from building a patio, mainly some planks. Normally when I'm creating firewood, I just use an axe a split the wood, but these are too long for that. I really don't want to ...
6
votes
2answers
3k views
Can you rout plywood?
I have some applewood 13 ply 3/4" plywood that I'm using for a desk top. I was wondering if I took a router to the edges if it would turnout ok.
6
votes
2answers
2k views
How do I safely get glue off of wood that's to be stained?
I'm building a closet and I've just made doors for it. It's red oak wood with a rail & stile construction and raised panels. I was a little careless and some of the wood glue (Titebond) escaped ...
3
votes
3answers
10k views
How do I remove excess wood stain that dried before I could wipe it off?
While staining some wood, we had an emergency and had to leave. The stain has now dried and I'm not sure how to remove the excess; it's normally wiped off before it dries.
When I get home I'm going ...
2
votes
3answers
838 views
Where should I look to rent time on a router table?
I have a woodworking project which requires a CNC router table. It would need a decent sized table for the 36" x 28" panels. Somebody that spends thousands of dollars on one of these machines must ...
1
vote
3answers
278 views
Where can I find the RAS131 dust hood for a Skil 1817 router?
I have been searching for a dust-collection device for my Skil 1817 fixed-base router, and I can't seem to find anything. I keep coming upon the same press release that indicates it is compatible ...
6
votes
4answers
3k views
What is the best way to shorten legs on a table and chairs?
A few years ago we bought a "bar height" kitchen table and chairs. It seemed like a good idea at the time but we hate it now. It's terrible to have to sit with your feet not touching the floor for ...
3
votes
2answers
322 views
How to select a good Triangle (Speed square?)
My father is now retired and has returned to his hobby of being a woodworker. He's been helping me build a standing desk for my office and happened to mention while we was working that he wished he ...
5
votes
2answers
2k views
Mitre Circular Saw blades for cutting Oak floorboards
I have two different blades (which are almost new) for my mitre saw. One has 24 teeth, the other has 48 teeth.
Which blade should I be using to cut oak floor boards?
4
votes
1answer
398 views
Woodworking Plans for an Office Desk
I am looking to build a desk for my office (L-shaped), but I am rather new at woodworking. I have the tools, and this would be a long project, but have no idea where to start.
Are there any good ...
4
votes
3answers
940 views
What is a good plan for building cube bookcases with basic tools?
I don't have a table saw or a router or anything like that. I do have a circular saw, and a drill. I could probably justify buying a tool like a Kreg Jig or something like that for this project.
5
votes
2answers
4k views
Plans for building a simple swing set out of wood
I would like to build a simple A-frame style swing set, which obviously has to be safe while also accommodating up to two swings.
Where can I find plans for building such a swing set?
3
votes
2answers
702 views
How to cut curved legs for a table
I'm planning to build a bed-side table and wish to build it with gently curved legs. I'm planning to recycle wood some old hardwood doors by cutting the blocks out with a circular saw, then cutting ...
2
votes
2answers
421 views
real dimensions of 2 by 4 in inches/centimeters [duplicate]
Possible Duplicate:
Why are 2“x4”'s really 1.5“x3.5”?
Just by looking at a 2 by 4 plank I can tell that it is neither 2in × 4in or 2cm × 4cm. What are its real ...
3
votes
3answers
128 views
What are my options for framing a thicker than average piece of artwork?
I have a piece of signed TV artwork that is mounted in cardboard frame aprox 1cm deep, that i want to hang on the wall. I've had a look round and most of the frames i've found aren't deep enough to ...
2
votes
4answers
145 views
Guidance needed for cutting rabbet
As in this question about making box shelves, I am looking at making some shelves and need some help. I've found this site describing how to make the shelves but need some pointers on what tools I ...
2
votes
4answers
549 views
Re-oiling a wooden worktop
I've sanded down a wooden worktop and I'm attempting to re-coat it. I've done 5 thin coats of oil so far, a day between each, but it's still quite dull compared to previously. How many coats should I ...
7
votes
4answers
482 views
What wood to build a bath-tub tray?
I'm new to wood working and I want to build my wife a bathtub tray that can hold a laptop (for Hulu watching) and a glass. It doesn't need to hold anything else really. But I don't know what type of ...
2
votes
3answers
196 views
Good technique for squaring-up hardwood edges?
I'm building a small shelf for organising my desk, using sections of 42mm*19mm hardwood. I've cut the pieces to appropriate length using a hand saw, allowing some tolerance for the kerf. Now I'd like ...
3
votes
2answers
157 views
Building custom cigar box - is there a MAYA or 3DSM to wooden cutout service
I am looking to build a custom cigar box, and was wondering if I were to design it in MAYA or 3D Studio Max and the figure out all the different pieces I would need. Is there a metal, plastic, or ...
3
votes
1answer
1k views
Where can I get a threaded wooden/metal rod for an adjustable piano stool?
I want to make a height adjustable stool, like a piano stool, of the simple screw/rotate type, but I don't have a lathe (or anything like enough skill) to turn a thread in wood myself.
Is there ...
5
votes
5answers
1k views
Are there any built in cabinet 'kits' available?
I am wanting to do cabinets between a wall and a fireplace. This would separate our living room from our dining room, so I want to build media cabinets (A/V equipment, DVD shelves, and a full ceiling ...
6
votes
2answers
3k views
Can I use an 8“ dado blade set in a 10” table saw?
I have a 10" table saw... this is probably a stupid question, but can I use an 8" dado blade set in this saw? Is one only supposed to use 10" blades in a 10-inch saw? I read on some contractor's ...
