1
vote
2answers
12 views

Reinforce chair stretchers with screws?

I have a set of dining room chairs and a table. Some of the chairs have their stretchers come loose. They were just held in with glue. Two years ago, I re-glued them and applied pressure with clamps ...
2
votes
3answers
145 views

How can I build a two-legged table?

I am building a rectangular coffee table and want to build it with two legs The table top will be 120cm x 100cm (approx 47x39inches). The table height will be 40cm (approx. 16 inches) the idea is ...
2
votes
1answer
92 views

Why did my third coat of polyurethane finish “buckle”?

I'm refinishing a table I built about 10 years ago. I put 2 layers of gloss polyurethane down and sanded between coats. All was fine at this point. I gave it another light sanding and put a third ...
1
vote
3answers
601 views

How to build disassemblable structure?

I'd like to build a largish (6' x 7' x 4') structure that can be assembled and disassembled on-site with only hand tools. I'm thinking about things like insert nuts, cam lock nuts, mortise/tenon ...
4
votes
1answer
2k views

How is a floating desk top supported against the wall?

Example of a floating desk top (courtesy of Phil Curtis): With increased height, it'd be one of simplest standing desk designs, and I am planning to do this at home. But, I am not sure how ...
2
votes
2answers
472 views

Which technique of wood joining is the best for joining these boards of a small table?

I want to join these four 1.8 cm thick beechwood boards as one can see on the picture. My idea is to join at the B points with biscuits but I’m not sure what to do about the A points. It needs to be a ...
7
votes
2answers
1k views

When repairing a split table top, should I use dowels, biscuits, or something else?

We bought a 5' diameter table many years ago from a Macy's warehouse sale. It's a 1" thick wood table top screwed to a cast iron leg/ base. When we bought it, it had a slight warp about 2/3s from ...
6
votes
1answer
341 views

While building a bed frame, at what point should I start worring about cross beams?

So, I've made this bedframe that's rather tall, the frame is 32" off the ground, and the legs are each bolted on with two 3/8" bolts running perpendicular, and horizontally. Having not actually used ...