The tag has no wiki summary.

learn more… | top users | synonyms

18
votes
13answers
48k views

What are cheap ways to build strong shelves with a large span?

I have removed several old and moisture damaged built in storage units from my house. I would like to replace them with shelving. There are a number of different sized gaps (width and depth to fill). ...
14
votes
3answers
593 views

What are some tips for finishing wood?

I'm kind of embarrassed to ask, but I'm looking for a good how-to guide for finishing pine furniture. (Could also apply to baseboards and trim, so I'm hoping for an on-topic pass here.) I watched my ...
11
votes
6answers
47k views

What grit sandpaper should I use between coats of polyurethane?

I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...
9
votes
2answers
27k views

What are the pros and cons of medium-density fibreboard (MDF)?

I heard mixed opinions about making cupboards and beds from MDF. Some said it doesn't matter, MDF is as durable as whole tree or sandwich boards. Some said that MDF is weak, and will not last for ...
7
votes
4answers
8k views

What is the best way to shorten legs on a table and chairs?

A few years ago we bought a "bar height" kitchen table and chairs. It seemed like a good idea at the time but we hate it now. It's terrible to have to sit with your feet not touching the floor for ...
7
votes
3answers
7k views

What is this soft, sticky wood finish and how do I remove it?

We have a second-hand table with a mysterious finish. The wood underneath is pale, possibly pine. With the finish, it's a slightly darker and "warmer" colour. The table is not antique; I'd guess only ...
7
votes
1answer
4k views

How can I get stains out of a pine table?

I have a light pine dining table. After we got married, we left an orchid from the wedding on the table while we went on honeymoon, giving it a bit of water before we went. Didn't realise the pot ...
6
votes
2answers
752 views

What is a durable, child-safe finish for a child's cot?

I recently purchased a flat packed cot for my soon to arrive baby. The wood is plain without any paint or varnish. How best should I finish off the wood on the cot in a way that is both durable and ...
6
votes
4answers
250 views

good books on carpentry

I have some experience with making basic furniture (beds, desks, shelving) and installing trim and fittings (hanging doors, replacing kitchens) and I am interested in learning how to get a better ...
5
votes
1answer
249 views

Am I doing something wrong with this sanding job?

I'm trying to finish a finishing job on a dresser; I abandoned the project (long story) a while ago after getting a few drawers done, and I've since lost the exact instructions I was following. After ...
5
votes
1answer
172 views

What is this type of traditional adjustable shelf support called?

I saw these on a bookcase in a shop today, but don’t know what they are called. Also is there an easy way to make them, or can they be bought “off the shelf”
5
votes
1answer
3k views

what is the best way to restore teak outdoor furniture?

What is the best way to restore outdoor teak furniture to the original or better looking color? Teak is so beautiful when it has not been weathered. But after a few years in the rain and sun, it ...
5
votes
1answer
950 views

How to get rid of spilled olive oil on teak table?

Yesterday a flask of olive oil accidentally dropped on our teak dining table. My spouse quickly used some paper towels to soak up most of the oil. The rest was evenly rubbed in to prevent spots. ...
4
votes
3answers
2k views

How can I repair screws in furniture with stripped holes?

I'm trying to repair a piece of furniture from which several screws have pulled out, stripping the wood. It's a lift top coffee table, such as this. (This is NOT the model in question, this just ...
4
votes
3answers
12k views

Whats the easiest way to fix sticky painted furniture so that it's no longer sticky?

I sanded and painted a dresser with several coats of 100% acrylic paint, namely, these paints: The paint job turned out good, with one issue. After 4-6 weeks of drying, the paint is still ...
4
votes
1answer
874 views

What kind of connection is used to attach the legs to this table?

I (a beginner) would like to build a table of this form. Does anyone know what kind of corners are used to connect the legs, or any other construction tips.
4
votes
3answers
1k views

What is a good plan for building cube bookcases with basic tools?

I don't have a table saw or a router or anything like that. I do have a circular saw, and a drill. I could probably justify buying a tool like a Kreg Jig or something like that for this project.
4
votes
5answers
15k views

How do I stain pine without streaks or blotches?

I did some test staining on pine scraps, and I ended up with a cross grain arc that's darker than everything else. Where did I go wrong? (Or is it just the pine?) (Related to this question, as a ...
4
votes
3answers
9k views

Do I need to pre-drill holes in particle board for screws?

I'm set to buy a bunch of IKEA furniture, which is notoriously all particle board. (Ah, particle board.) I'd like to strengthen some of the beams of the HOPEN bed with L-brackets from the big-box ...
4
votes
1answer
1k views

What is the difference between various wood sealers?

I've recently become aware of the existence of various seals for wood. I'm lead to believe that they are necessary, but I am unclear on the differences between the types of sealers you can find: ...
4
votes
1answer
1k views

Does No VOC Polyurethane Work Well?

I am finishing a piece of furniture for my home and would like to use a no (or low) VOC (Volatile Organic Compound) product. However, there does not seem to be many on the market. I found one so ...
4
votes
2answers
101 views

Why is the polyurethane finish I applied a month ago still tacky?

I recently decided to imbed my nieces picture into a serving tray style tabletop. Printed the picture, had it laminated, bought polyurethane, followed the directions to a "T". Its now one month and a ...
4
votes
1answer
599 views

Woodworking Plans for an Office Desk

I am looking to build a desk for my office (L-shaped), but I am rather new at woodworking. I have the tools, and this would be a long project, but have no idea where to start. Are there any good ...
3
votes
3answers
737 views

Do I need to sand this unfinished table?

I've gathered that the step immediately before staining a table is to sand it. However, I wonder how to tell when the table is smooth enough? Can I skip the sanding step? In my case I bought an ...
3
votes
3answers
670 views

Are plywood dovetails a good solution to building something that needs to be dismantled?

Are hand cut, plywood dove tails feasible? Assuming you can get "good" plywood, i.e. not the brittle splinter-fest I've seen around, is dovetailing feasible? I'd like to avoid using glue for the ...
3
votes
2answers
948 views

How to cut curved legs for a table

I'm planning to build a bed-side table and wish to build it with gently curved legs. I'm planning to recycle wood some old hardwood doors by cutting the blocks out with a circular saw, then cutting ...
3
votes
2answers
659 views

Can I use alcohol for cleaning tables?

For some reason, an unpleasant scent wafted into my room on Sunday, and coincidentally, it was a rainy day that day. As a result, the scent is now stuck to my table, and anything that I put on the ...
3
votes
2answers
245 views

How can I clamp two 325 mm planks while gluing them together?

I have a base that is 650mm deep. I'm going to have to glue several planks together to get this depth and, eventually, the last two to make the 650mm base. The problem is, I don't have (and can't ...
3
votes
2answers
374 views

Can mindi wood be used outdoors?

Does anyone here have experience with mindi wood? For example furniture made from mindi wood? Is it also usable in outdoor scenarios, e.g. for garden furniture? What kind of finish is needed?
3
votes
1answer
387 views

How can I repair a dining room table with folding ends?

If so, I've got a nice old dining room table that folds down quite small (seats 2) but also can be pulled out with leaves to seat ~8. The ends of the table are supported by swing-out arms that are ...
3
votes
1answer
2k views

How do I design and build a simple, sturdy, and affordable table?

Table Design I'd like to build two tables at custom proportions to display my LEGO model city. I've already designed the layout consisting of two tables aligned into an L shape: The two ...
3
votes
1answer
831 views

How can I repair damaged wood lacquer?

I've ruined a wooden, varnished table by putting a hot mug of tea down on it. In case that’s relevant, the cup was also slightly wet (only water). Now at the place where the mug stood is a ...
2
votes
3answers
1k views

How can I shorten barstools temporarily so I can reattach the bottom of the legs?

I have a couple solid-wood-legged barstools that I want to temporarily (for a year or so) shorten by 6 inches. Is there any good way to cut the legs so they'll be more stable upon reattachment? Or ...
2
votes
3answers
714 views

What is a good wood to use to build a base for a heavy antique table top?

So my gf has a really sweet antique baker's table top. It has what I believe is a porcelain but may be ceramic finish. I've never tried lifting it (it was here before I was) but she tells me it ...
2
votes
2answers
457 views

How can I paint furniture with a laminate finish?

Is it possible to paint furniture that is made of particle board and has a laminate finish that makes it appear as if it is solid wood? Essentially cheap furniture. I have an entertainment center than ...
2
votes
3answers
96 views

How can I contain epoxy while it sets up?

So I finally built my portable home bar but I would like to have a bottle cap bar top with epoxy coating. However, I do not want to add wooden edges to contain the epoxy when I pour it over the bottle ...
2
votes
2answers
436 views

Which technique of wood joining is the best for joining these boards of a small table?

I want to join these four 1.8 cm thick beechwood boards as one can see on the picture. My idea is to join at the B points with biscuits but I’m not sure what to do about the A points. It needs to be a ...
2
votes
1answer
724 views

Portable home bar plans?

I'm moving into about a 1500 sq. ft. house soon and I would like to build my own portable bar that I can store beverages in. It should be long enough to put a couple stools in front of where people ...
2
votes
1answer
584 views

Does pickling wood with steel wool and vinegar harm the wood?

I love the look produced from pickling wood with steel wool and vinegar. See this example for details. I am hesitating to actually do this on a raw ready-to-finish table because I fear the steel ...
2
votes
1answer
299 views

How do I fix my table top from chemical damage?

I do acrylic nails and I'm usually pretty cautious, but today I've had either monomer liquid or acetone leak through my many layers of towels. It has caused the finish on my table to blister and ...
2
votes
1answer
424 views

What should I do about partially tacky urethane finish?

so I've been refinishing an interior bench. The bench had a very old polyurethane/resin finish which I sanded completely off, there was nothing other than bare wood when I stained it. I stained the ...
2
votes
2answers
2k views

When can I seal the picnic table I made from pressure treated lumber?

I have just built my very first picnic table (really, my very first anything). I used pressure treated lumber and galvanized hardware. I would like to seal the table before I put it outside, but I'm ...
2
votes
1answer
359 views

How can I make a park bench more sturdy?

I purchased a park bench for my patio But it's a little on the flimsy side and I'm afraid someone is going to throw themselves down on it and it's going to break. In what way can I strengthen the ...
1
vote
2answers
136 views

Is beeswax ok to use to keep a screw tight?

I have purchased a table and chair set, and the screws holding it together consistently come loose (from pulling and dragging I assume). I have heard that beeswax will help hold things together, and ...
1
vote
2answers
148 views

What is the best way to level a tree log?

I'm making an end table/floor lamp from a 3 ft cut log. What's going to be the easiest or best way to level the bottom and top of this piece? I thought about throwing it up on some saw horses and ...
1
vote
1answer
266 views

How do you build a bookcase around an outside or convex corner?

How do you build a bookcase around an outside or convex corner?
1
vote
2answers
924 views

How do I prevent wood from warping?

I have an electricity inspection box inside the house. What I'd like to do is build a small wooden cabinet to enclose it (it is flush to the wall). I've measured up and bought five pieces of wood: ...
1
vote
2answers
386 views

How to repair a small hardwood crack?

I have a maple bench that recently decide to crack. I'm not sure what's the cause. I'm guessing wood expansion due to humidity changes. Anyway, I've decided to look around for solutions on fixing the ...
1
vote
3answers
761 views

How to clean feet of wooden chairs to replace felt pads-

I am using and caring for a set of wooden chairs (hand-carved backs) belonging to a family member.I need to add new felt pads to the feet of most of these, as some have had old ones fall off (the ...
1
vote
2answers
3k views

How can I repair a chip in partical board table top?

I got this table from IKEA, and it was delivered with damage in it, unfortunately I did not recognize it as I had to check 10 packages but this is another story. As you can see in the picture there ...