I have removed several old and moisture damaged built in storage units from my house. I would like to replace them with shelving. There are a number of different sized gaps (width and depth to fill). ...
I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...
I'm kind of embarrassed to ask, but I'm looking for a good how-to guide for finishing pine furniture. (Could also apply to baseboards and trim, so I'm hoping for an on-topic pass here.) I watched my ...
I did some test staining on pine scraps, and I ended up with a cross grain arc that's darker than everything else. Where did I go wrong? (Or is it just the pine?) (Related to this question, as a ...
A few years ago we bought a "bar height" kitchen table and chairs. It seemed like a good idea at the time but we hate it now. It's terrible to have to sit with your feet not touching the floor for ...
I've recently become aware of the existence of various seals for wood. I'm lead to believe that they are necessary, but I am unclear on the differences between the types of sealers you can find: ...
What can I do to fix my bed? The screws go through the headboard and footboard into the side bars, but the whole thing is loose. When I get into bed it's all fine as I have pushed the headboard up ...
I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...
So, I am working on changing the stain on my particle-board cabinet(disassembled). I sanded, and then pre-stained the various pieces. I have also applied the first coat of stain(ebony) to the wood ...