The tag has no wiki summary.

learn more… | top users | synonyms

0
votes
1answer
25 views

How to make table legs from wooden planks?

I'm making a coffee table out of old pallets. The top part is finished, all it needs now is legs. I want to use only parts from old pallets and I don't want it to become very heavy, so I was thinking ...
0
votes
1answer
12 views

Softened Polyurethane Finish

I have a (bed) headboard that was refinished about 25 years ago. The original finish was a white French Provincial. The refinish consisted of white latex paint covered with a glaze. A protective top ...
0
votes
1answer
33 views

Speaker veneer challenge (wood repair)

So I bought great but slightly damaged speakers and I would like to restore them, I understand they won't look like new but I would like to try my best. The damage: The wood texture detail: I was ...
0
votes
1answer
192 views

Hollowing out wood log for table

I'm planning to cut down either a pine or beech in the near future, as I heard that the fall/winter season is a good time to cut trees if you want to dry the wood quickly. After cutting a log the ...
2
votes
3answers
96 views

How can I contain epoxy while it sets up?

So I finally built my portable home bar but I would like to have a bottle cap bar top with epoxy coating. However, I do not want to add wooden edges to contain the epoxy when I pour it over the bottle ...
4
votes
2answers
102 views

Why is the polyurethane finish I applied a month ago still tacky?

I recently decided to imbed my nieces picture into a serving tray style tabletop. Printed the picture, had it laminated, bought polyurethane, followed the directions to a "T". Its now one month and a ...
12
votes
6answers
48k views

What grit sandpaper should I use between coats of polyurethane?

I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...
1
vote
2answers
109 views

What is an aesthetically pleasing way to add lateral support to a loft bed?

I'm building a loft bed, and while I have a pretty good handle on the surface, I'm still trying to figure out the posts. Two adjacent sides are against walls, so I could put in diagonal beams, or ...
0
votes
1answer
55 views

Assemble and dissemble tools for vanity table

I am planning on building my girlfriend a vanity desk where she can apply her special make-up and all that lady stuff she enjoys as my anniversary gift. I have a concept in mind but one thing I know I ...
0
votes
2answers
48 views

Dresser drawers getting stuck

I've got a dresser whose drawers get stuck and won't open. Nothing is blocking them, they just seem to get stuck on the runners. None of the runners seem loose or damaged, so I don't really know ...
4
votes
3answers
12k views

Whats the easiest way to fix sticky painted furniture so that it's no longer sticky?

I sanded and painted a dresser with several coats of 100% acrylic paint, namely, these paints: The paint job turned out good, with one issue. After 4-6 weeks of drying, the paint is still ...
7
votes
3answers
7k views

What is this soft, sticky wood finish and how do I remove it?

We have a second-hand table with a mysterious finish. The wood underneath is pale, possibly pine. With the finish, it's a slightly darker and "warmer" colour. The table is not antique; I'd guess only ...
0
votes
2answers
42 views

How Should I Store Antique Furniture?

I have some fairly large/heavy antique wood furniture (ranging from 30-90 years old) that I need to store in an in-ground unfinished basement, potentially for a few years. At the moment it's mainly ...
0
votes
0answers
61 views

How would I go about building this bed frame myself?

I am in love with this simplistic style bed, however, it is quite expensive. I feel like if I had the right instructions or some ideas to go on I could do it myself. If anyone has any idea on how this ...
1
vote
2answers
137 views

Is beeswax ok to use to keep a screw tight?

I have purchased a table and chair set, and the screws holding it together consistently come loose (from pulling and dragging I assume). I have heard that beeswax will help hold things together, and ...
5
votes
1answer
172 views

What is this type of traditional adjustable shelf support called?

I saw these on a bookcase in a shop today, but don’t know what they are called. Also is there an easy way to make them, or can they be bought “off the shelf”
0
votes
0answers
76 views

Can turnbuckles hold a frame in tension?

I'm building a king-sized bunk bed using a loft/joist design. Basically, I've got (see below): slats nailed into joists joists joined to headers with blind tenons headers joined to posts with blind ...
0
votes
3answers
201 views

Suggested materials for monitor stand?

I have a 27" iMac and a second 30" display, and since I'm fairly tall I need them raised off the desk by about 20cm / 8". What is a good building material/design to build such a stand? I'm looking ...
1
vote
2answers
62 views

How do I remove paint from a porous table top?

I bought an unfinished kitchen set and had previously painted it white. We decided after a year that we wanted a bit of a different look. So, we decided we wanted the contrast of a natural or ...
1
vote
1answer
170 views

What is the 'orangey' colour on this pine and how do I remove it?

I've recently bought some pine furniture which is well built and solid but needs a bit of TLC. It is also finished with something that gives it a kind of 'orangey' colour. It has some scratches and I ...
5
votes
1answer
3k views

what is the best way to restore teak outdoor furniture?

What is the best way to restore outdoor teak furniture to the original or better looking color? Teak is so beautiful when it has not been weathered. But after a few years in the rain and sun, it ...
0
votes
2answers
152 views

Removable Table Top for Workbench

I am starting my first DIY project -- a workbench for my 2 year old. I'd like the bench to function in two ways. With the table top on, it will be a traditional workbench surface. But I'd like to ...
3
votes
3answers
673 views

Are plywood dovetails a good solution to building something that needs to be dismantled?

Are hand cut, plywood dove tails feasible? Assuming you can get "good" plywood, i.e. not the brittle splinter-fest I've seen around, is dovetailing feasible? I'd like to avoid using glue for the ...
3
votes
2answers
245 views

How can I clamp two 325 mm planks while gluing them together?

I have a base that is 650mm deep. I'm going to have to glue several planks together to get this depth and, eventually, the last two to make the 650mm base. The problem is, I don't have (and can't ...
1
vote
1answer
684 views

How do I determine the thickness of wood needed for a desk?

I would like to make some furniture. It'll hold my computer, some books and still need to be strong enough to hold the weight of me leaning on it etc. How to I calculate what thickness of wood is ...
14
votes
3answers
594 views

What are some tips for finishing wood?

I'm kind of embarrassed to ask, but I'm looking for a good how-to guide for finishing pine furniture. (Could also apply to baseboards and trim, so I'm hoping for an on-topic pass here.) I watched my ...
1
vote
0answers
269 views

Is this white powdery substance on a wood shelf caused by flying termites?

There were probably about 100 or 200 so flying termites inside the house two days ago. They were all flying to the ceiling lights, and I placed buckets of water below it and many got in. I also ...
4
votes
3answers
9k views

Do I need to pre-drill holes in particle board for screws?

I'm set to buy a bunch of IKEA furniture, which is notoriously all particle board. (Ah, particle board.) I'd like to strengthen some of the beams of the HOPEN bed with L-brackets from the big-box ...
1
vote
1answer
111 views

How do I renovate this wooden furniture?

The furniture aren't very damaged, just a bit worn. I don't have any knowledge or experience on the subject, I'm just trying to revive them a bit. I'd rather not unscrew it or take it apart. I found ...
5
votes
1answer
958 views

How to get rid of spilled olive oil on teak table?

Yesterday a flask of olive oil accidentally dropped on our teak dining table. My spouse quickly used some paper towels to soak up most of the oil. The rest was evenly rubbed in to prevent spots. ...
1
vote
1answer
266 views

How do you build a bookcase around an outside or convex corner?

How do you build a bookcase around an outside or convex corner?
7
votes
4answers
8k views

What is the best way to shorten legs on a table and chairs?

A few years ago we bought a "bar height" kitchen table and chairs. It seemed like a good idea at the time but we hate it now. It's terrible to have to sit with your feet not touching the floor for ...
3
votes
2answers
948 views

How to cut curved legs for a table

I'm planning to build a bed-side table and wish to build it with gently curved legs. I'm planning to recycle wood some old hardwood doors by cutting the blocks out with a circular saw, then cutting ...
0
votes
1answer
222 views

what substance should I use to refill a hole in wood?

I have a small wooden table (ikea) where the legs screw into the table top. The hole - into which one of the legs screw in - became wider, so now the leg is wobbly. How would I fix this? Is there a ...
2
votes
2answers
2k views

When can I seal the picnic table I made from pressure treated lumber?

I have just built my very first picnic table (really, my very first anything). I used pressure treated lumber and galvanized hardware. I would like to seal the table before I put it outside, but I'm ...
1
vote
2answers
388 views

How to repair a small hardwood crack?

I have a maple bench that recently decide to crack. I'm not sure what's the cause. I'm guessing wood expansion due to humidity changes. Anyway, I've decided to look around for solutions on fixing the ...
4
votes
3answers
2k views

How can I repair screws in furniture with stripped holes?

I'm trying to repair a piece of furniture from which several screws have pulled out, stripping the wood. It's a lift top coffee table, such as this. (This is NOT the model in question, this just ...
2
votes
1answer
364 views

How can I make a park bench more sturdy?

I purchased a park bench for my patio But it's a little on the flimsy side and I'm afraid someone is going to throw themselves down on it and it's going to break. In what way can I strengthen the ...
1
vote
2answers
148 views

What is the best way to level a tree log?

I'm making an end table/floor lamp from a 3 ft cut log. What's going to be the easiest or best way to level the bottom and top of this piece? I thought about throwing it up on some saw horses and ...
2
votes
2answers
436 views

Which technique of wood joining is the best for joining these boards of a small table?

I want to join these four 1.8 cm thick beechwood boards as one can see on the picture. My idea is to join at the B points with biscuits but I’m not sure what to do about the A points. It needs to be a ...
0
votes
3answers
2k views

How can I remove the old wood smell from furniture?

My wife just bought an old cabinet from a consignment store. The inside has a strong old wood smell that we are afraid will infuse whatever we put inside. How do get rid of the smell so we can use it ...
1
vote
2answers
3k views

How can I repair a chip in partical board table top?

I got this table from IKEA, and it was delivered with damage in it, unfortunately I did not recognize it as I had to check 10 packages but this is another story. As you can see in the picture there ...
1
vote
2answers
379 views

How can I fix a big crack on an old hutch?

A full wood side of an older hutch has cracked, probably along the grain. It seems gluing was attempted (there was some dried glue or silicon-like substance in the crack) unsuccessfully. Can I fix ...
18
votes
13answers
48k views

What are cheap ways to build strong shelves with a large span?

I have removed several old and moisture damaged built in storage units from my house. I would like to replace them with shelving. There are a number of different sized gaps (width and depth to fill). ...
1
vote
0answers
32 views

How to replicate holes in a wooden cabinet? [duplicate]

Possible Duplicate: How do I drill additional holes for adjustable-height shelving? I would like to modify the vertical position of a shelf inside a wood cabinet. The dowel pins are glued ...
4
votes
5answers
15k views

How do I stain pine without streaks or blotches?

I did some test staining on pine scraps, and I ended up with a cross grain arc that's darker than everything else. Where did I go wrong? (Or is it just the pine?) (Related to this question, as a ...
3
votes
1answer
388 views

How can I repair a dining room table with folding ends?

If so, I've got a nice old dining room table that folds down quite small (seats 2) but also can be pulled out with leaves to seat ~8. The ends of the table are supported by swing-out arms that are ...
1
vote
2answers
927 views

How do I prevent wood from warping?

I have an electricity inspection box inside the house. What I'd like to do is build a small wooden cabinet to enclose it (it is flush to the wall). I've measured up and bought five pieces of wood: ...
1
vote
3answers
766 views

How to clean feet of wooden chairs to replace felt pads-

I am using and caring for a set of wooden chairs (hand-carved backs) belonging to a family member.I need to add new felt pads to the feet of most of these, as some have had old ones fall off (the ...
2
votes
3answers
1k views

How can I shorten barstools temporarily so I can reattach the bottom of the legs?

I have a couple solid-wood-legged barstools that I want to temporarily (for a year or so) shorten by 6 inches. Is there any good way to cut the legs so they'll be more stable upon reattachment? Or ...