I apologies if this was already covered but I could only find a thread on books, and it was geared towards someone having some basic skills already. While I am far from useless, I never had a reason ...
I'm going to be cutting 1x6 oak planks with a miter saw, but I'm not sure what blade to use. I currently have a 24T blade in the saw (which I know for sure I don't want to use), since I usually use it ...
In theory, to cut a 350mm piece out of a longer board, I would have to mark the line at 350mm + half of blade width. So if I have a 2mm hand saw, the line would be drawn at 351mm. How does that work ...