0
votes
0answers
31 views

Is it a problem that I have two of each color wires on my Honeywell thermostat?

I am thinking about upgrading my Honeywell thermostat. Every thing I have seen describes / shows a single wire for each color. My current thermostat has two wires connected to each terminal (two green ...
0
votes
1answer
36 views

Is my thermostat transformer voltage too low?

I measured the voltage at the thermostat Rc to G and Rc to Y terminals, and they read 16.2V and 16.34V respectively. Shouldn't I be measuring 24V+/-? I purchased a Nest thermostat and it will not ...
0
votes
1answer
50 views

Replacement thermostat wiring

I have an American Standard heat pump AC. I'm replacing a White-Rodgers manual thermostat (where I move a switch from cold to heat) with a Honeywell RTH7600 (which will automatically switch from cold ...
1
vote
2answers
2k views

Adding a C wire to a new Honeywell WIfi Thermostat

I am trying to install a new Honeywell touchscreen WIFI thermostat (http://www.homedepot.com/p/Honeywell-Wi-Fi-Smart-Thermostat-RTH9580WF/203926327?N=5yc1vZc5kl) and need to add a C wire to my ...
0
votes
1answer
91 views

why does my heat pump wiring diagram show 7 wires going to the thermostat but the thermostat only says it needs 5?

Here is a link to the wiring diagram for my heat pump. The thermostat that I am planning on buying has the following terminals C, G, Y, O/B, RC, R, Aux, E, and L. The instructions say to jump the RC ...
1
vote
2answers
520 views

Wifi Thermostat wiring

Replacing 2 Hunter thermostats with a Honeywell RTH9580 Wifi. Neither unit has a C wire - I'm comfortable with the upstairs high efficiency unit, but the downstairs older unit has thrown me for a ...
1
vote
0answers
67 views

Why won't a NEST that shares control of a furnace with a conventional thermostat turn on the heat?

I have three floors in my home. The bottom floor has its own gas furnace and the 2nd and 3rd floors share another gas furnace. Everything was working great until I added a NEST to the first and ...
4
votes
1answer
190 views

How can I determine if my HVAC system has features which are not currently wired to my thermostat?

I recently upgraded to a Nest Thermostat. This new thermostat supports many more terminals and features than my previous thermostat. My old thermostat had the basic terminals; G,R,C,Y, and W. I am ...
1
vote
2answers
404 views

Honeywell T6360 wiring - follow installation wiring guide positions or numbers?

The following picture shows a Honeywell T6360 Room Thermostat wiring connections. You will note they are numbered in the order 2 3 4 1 5 6. The Installation Instructions that accompany this unit, ...
1
vote
1answer
291 views

How do I connect a C-wire on a Triangle Tube Prestige Solo 110? [duplicate]

I purchased a Honeywell RTH6580WF to use with my recently installed Triangle Tube Prestige Solo 110 propane boiler. I only have two wires at my existing heat-only thermostat. I understand that the ...
3
votes
2answers
510 views

Can I use an unused wire as a “C” wire?

I just bought a new thermostat that is Wi-Fi enabled and it requires connection to a "C" wire. The old thermostat does not have one running to it, but there are other unused wires. The thermostat ...
1
vote
2answers
2k views

Which terminal should I connect it to for a “C” wire when none are labeled “C”? [duplicate]

I am looking to replace my old battery operated thermostat with a new wifi model. There is no "C" common wire connected to my old thermostat. There is a blue wire that is at the thermostat but cut ...
0
votes
1answer
305 views

How can I add a C-wire to a Venstar T5800 thermostat?

I am trying to replace my existing thermostat. My old thermostat has: Rh, W (coming from the heating unit). Rc, Y, G (coming from the AC unit). On the Venstar T5800, I can map as follows: Rh+Rc ...
2
votes
1answer
240 views

What could be damaged if I shorted the R wire to the C wire at my thermostat?

OK... so in trying to install a thermostat (and testing to see if the old thermostat was bad) I inadvertently jumped the R and C... (I actually jumped the R and G terminals but the G terminal was ...
1
vote
1answer
671 views

How do I wire this thermostat?

Hello I have a Honeywell FocusPRO 5000 Non-Programmable 1 Heat/1 Cool Thermostat, Large Screen. The wires it needs are: Conventional Terminals: Rc 24VAC power from cooling transformer R ...
11
votes
2answers
7k views

Why is my Nest thermostat not working with A/C?

I installed Nest thermostat a few weeks ago, replacing an old Lux programmable thermostat (there was nothing wrong with it). I connected 4 wires (R,W,Y and G) to the Nest. But as soon as I'd ...
0
votes
3answers
2k views

How can I use a separate transformer to provide a C wire to my thermostat?

I Purchased the Honeywell WiFi Prog Thermostat to replace my Round Digital Honeywell Thermostat. I have separate Heating and Cooling (Heating is a Weil McLain Boiler for Hot water baseboard and Hot ...
3
votes
2answers
3k views

Should my thermostat's blue wire be going to W2?

I've recently moved into my first house and am looking to replace the existing basic thermostat in the home. Here is a picture of how I found it wired: Researching the wires, I've read that ...
3
votes
2answers
1k views

Can I piggyback a thermostat with a C Wire hookup on a furnace?

I'm trying to install a new thermostat that needs a C wire hookup. There are currently 4 wires running from the thermostat to the furnace, none of them are a c wire. When I look at my furnace itself ...
6
votes
4answers
2k views

Buying a programmable thermostat to replace a manual one: any considerations?

I'm about to look for a programmable thermostat to replace a manual one. There are already a couple of good questions on thermostat replacement that make the task seem pretty straightforward for ...
4
votes
2answers
11k views

What should I use to wire a 220v electric baseboard heater and thermostat? 12/2 or 12/3

When I bought my baseboard heaters, thermostats and 220v breakers I was advised to get 12/3 wire. When I attempted to install the heaters I found that the thermostats, heaters, and even breakers have ...
3
votes
1answer
5k views

How should I wire this White-Rodgers fan and limit control? What about the thermostat?

I have a wood-burning stove, that is used as an auxiliary heat source in the house. There's a regular electric furnace, and adjacent to it is the stove. The warm air duct (out) from the stove ...
3
votes
1answer
565 views

How do I properly wire a 5-wire thermostat? What is this ambiguous '4' label?

I took the old thermostat off, and had G,Y,W,Rc and '4' terminals connected to the Green, Yellow, White, Red and Black wires respectively. Voltage from Rc to G|Y|W was 24VAC as well '4' to G|Y|W ...