I am replacing a bathroom vent, light, heater combo. The wiring from the house has three switches, but has only two lines with three wires (black, white and ground). The new vent, light and heater ...
My bathroom has one switch that powers the fan and light. In that electrical box, there is also a hard wired electrical outlet that sits in the bathroom. Since I don't have room for a 2 gang box in ...
I could use a diagram to wire the following: a bathroom exhaust fan with light on two separate switches. I also need a 3rd switch for a vanity light and a GFCI. My power comes from the attic (12/2 ...
I am replacing a bath fan/light with a fan/light/night light combination fixture. I need a new wall switch with 3 controls. I currently have just a cable with hot, neutral and ground running through ...
I just bought a Panasonic FV-20NLF1 inline bath exhaust fan that I planned to used to exhaust 2 different bathrooms. I want each bathroom light switch to control the fan, so when the lighting turns ...
Still working on installing my exhaust fan. It required a dedicated 20A circuit so I ran #12 copper. The wiring from the unit appears to be #14 stranded. It's also silver colored but I don't know if ...