I am about to have my windows replaced at my home. The openings are all block frame, which from what I understand generally means that the exterior trim of the window doesn't need to be disturbed. A ...
I am building a wall in my condo. To place the stud as close to the window frame as possible, I had to cut through the rectangular enclosure (that houses a power cable) made of plywood and covered by ...
I would like to install some cellular shades. I'd like to inside mount them, but my window recesses are very small - as little as 1/2". For a shade that requires a recess of at least one inch, one ...
I recently moved to a home (new to me). One thing that is bothering me quite a bit is a gap between wall and window trim. You can see the picture below. How do I get rid of this? What are the basic ...
After the window has been secured in the rough opening, how do you finish the inside part of the installation? For example adding a window sill and trimming out the inner portion of the rough opening, ...
I'm planning to install plastic window wrap on my windows for the winter, but the trim around the windows is nice wood and I don't want to leave a mark on it where the double-sided tape will be. I've ...
We recently bought a house that was in the midst of a remodel. The PO had replaced 80% of the windows but had not gotten to the trim. The issue I have is the jam does not match with the drywall. In ...