The tag has no wiki summary.

learn more… | top users | synonyms

2
votes
1answer
652 views

Why do I have low water pressure with more than one fixture turned on?

What would cause low water pressure or flow when more than one fixture is turned on. It does not matter if it's hot or cold water.
0
votes
0answers
8 views

Checking the pressure in a Megaflo?

I have a Megaflo cylinder, that looks very much like this one: It is fed from a central boiler system in the building (I live in a new build flat, about 5 years old). The Megaflo provides hot water ...
0
votes
1answer
31 views

How do I recharge this pressure pump?

The plumber is a notorious no show for days if not weeks and I would like some water pressure. Not to mention being self-sufficient. Here is a photo of the pressure pump. http://imgur.com/R3xkR6A
1
vote
1answer
38 views

All kitchen water supplies have low pressure

My kitchen was remodeled and I noticed since then the water pressure for new area has been low (hot and cold). Previously we had one sink and dishwasher, now we have Two Sinks Dishwasher Instahot ...
0
votes
1answer
34 views

How to prevent pressure from dropping from my water heater?

Until two weeks ago, my parents house used one water heater ( noted "1" on the picture) to provide two bathrooms and the kitchen with hot water. The bathroom on the first floor consists of a bathtub ...
0
votes
2answers
50 views

Can I have two pressure tanks on my system?

I have a 3000 gallon water storage tank that my 4 inch well pump (800 feet down) fills up and the water tank then gravity feeds about 5 feet into a shallow well pump that pumps water into a 60 gallon ...
0
votes
1answer
30 views

Why is there no hot water in the kitchen after flushing our water heater?

My husband and I recently moved into a new house that has two water heaters. One is gas and supplies the main portion of the house, the second is electric and (as far as we can tell) only supplies the ...
2
votes
1answer
1k views

What should I do about this Alpha HE CB33 Boiler pressure error condition?

I have an alpha he cb33 boiler which has stopped working this morning. Yesterday I removed a radiator for cleaning then put it back on and re-pressurised the system. It was working ok last night. ...
0
votes
3answers
124 views

Should a water distribution manifold consist of a circular loop?

I'm replacing the copper in my house with PEX tubing and I'd like to set up my new utility room with hot water and cold water manifolds. Each connection on the manifold would then lead to either hot ...
5
votes
2answers
322 views

How to clear pool filter pressure gauge that is stuck?

I've got an in-ground pool, and a DE filter from Jandy. The pressure gauge is in an assembly bolted to the top. The assembly looks like something like this (image from catalog, mine is pretty much ...
2
votes
2answers
85 views

How can I increase water pressure after installing dual-head shower?

I recently installed a 2-headed shower system in my master bathroom (2 shower heads coming from one pipe). Afterwards, the problem I suspected occurred. Having the "gate", if you will, set to direct ...
2
votes
3answers
2k views

Why does my bathroom shower have too much water pressure?

I have the same shower head, nothing has changed except the pressure. It sprays so hard that it hurts, and in 10 minutes the hot water is almost gone. What can I do to fix this?
0
votes
3answers
55 views

Home Water Pressure

Does house size matter when it comes to water pressure? I have a 3000sq.ft. 4 level split and the Master suite is on the top floor. I use a well and live in the country. Pump is 3/4 HP jet pump. ...
0
votes
1answer
31 views

Questions about residential water pressure booster

We live on the top of a hill and thus have fairly low city water pressure (35psi) arriving at our house. I have a chance of saving quite a bit of money on my water bill by potentially reducing this ...
1
vote
4answers
7k views

Why does my shower head drip when the tub faucet is on?

I just installed a new tub fixture set: There are two controls - one for temperature and one for volume. The large handle is volume. When the diverter valve is engaged the shower sprays properly ...
0
votes
2answers
66 views

Why do I have almost no water pressure after installing a new valve?

We had a leaky shut off valve under our master bathroom sink. The valve appeared to be original to the house. That would put it in the 40 year old range. I replaced the valve with a new “Shark ...
0
votes
1answer
114 views

Why is my downstairs shower pressure lower than upstairs?

My shower pressure in my upstairs bathroom is fantastic. However, the same cannot be said for the downstairs bathroom (ground floor). Given the fact that upstairs is disadvantaged, this does not make ...
0
votes
0answers
43 views

Why have I lost water in part of my house?

I've suddenly lost pressure only in 1 of 2 upstairs bathrooms. Both hot and cold are completely off. Both the sink and shower are affected. A second upstairs bathroom and the downstairs kitchen are ...
7
votes
4answers
13k views

Why does my kitchen faucet have low pressure after the water heater was replaced?

I recently replaced my water heater, and since then, the water pressure for my kitchen faucet is really, really, low. None of my other faucets seem to be affected (bathroom, shower, etc.). I can't ...
0
votes
0answers
51 views

Why don't I get water presure in my shower unless my bathroom sink is on?

A few weeks ago our water froze and we had some pipe problems. We got them fixed, but now there is no pressure in the shower except when the bathroom sink is on. Why is this? What can I do to fix it? ...
1
vote
1answer
71 views

Will I notice a pressure drop going from 1/2“ pex to 3/4” CPVC then to 1/2" CPVC?

So I'm replacing my older CPVC piping in my house and I have access to almost the entire house except the master bath area. At first I thought it was being fed by a 1/2 inch line that I could just ...
4
votes
2answers
442 views

What killed my kitchen faucet pressure?

I have a one-handle "Marielle" model Pfister kitchen faucet diagrammed here. It leaked, so I replaced the cartridge, which solved the problem. A few weeks later, I happened to drain my hot water ...
0
votes
2answers
134 views

Should I replace my Pressure Reducing Valve?

A few weeks ago, my oil-fired water boiler started continuously leaking water out of the pressure release valve on the top of the unit. I know this is leaking steadily because it drains into a 5gal ...
0
votes
0answers
338 views

Why is there no water pressure after turning main off then back on?

Came home after work to a water leak, a coupling had corroded and come apart on the hot water line. Turned water main off and repaired the leak but when I turned the water back on I had no hot or ...
0
votes
0answers
83 views

Can I reduce cold water inlet flow to combi boiler?

I have an ideal min c28 combi boiler. The problem is that with the shower fully on the temperature never gets hot enough for my wife, and, worse still, it can fluctuate between boiling and cold. I ...
1
vote
1answer
83 views

Water pressure low after hose was left on overnight

The water pressure inside my house went way down and stayed down after the hose was left on overnight. It's been a while now and the water pressure is still low (useable but low). The air pressure ...
2
votes
1answer
668 views

What could be causing water pressure to build up after changing my under sink filter?

After I did a routine under sink water filter change, I am getting a powerful burst of water when I turn on the water dispenser that goes through the filter. It lasts only a second or so then the ...
2
votes
3answers
3k views

Why does only the hot water have low Water Pressure from my 2 handle kitchen faucet?

My kitchen faucet is a two handle style with a single delivery spout. The water pressure for the cold water and for ALL the other water sources in the home work fine. The water pressure for the hot ...
4
votes
1answer
155 views

What are the differences between an expansion tank and a pressure sensor?

We have a red expansion tank in our building. We have so many problems with this tank. Every 3 months we have to change the tanks tube because the tube is perforated every 3 months. Now an expert ...
0
votes
0answers
233 views

How can I determine why there is no water coming from my hot taps?

I'm getting no water from any of the hot taps in my house. The cold water taps are working fine. The central heating is also working. I have a combi-boiler. It's been fairly cold today in London, so ...
3
votes
1answer
1k views

What could cause my showers hot water to not work well after water main work?

We had some work done on the mains cold water feed into the house. At first everything worked just fine but after about a day when the top floor shower is now switched on there's a rapid banging noise ...
4
votes
1answer
221 views

Why would my pressure reducing valve fail after repairing my water main?

I had a main water line bust on my side of the water meter. After fixing it and turning water back on to my house my water heater T&P valve kept releasing spurts of water which found out it was ...
0
votes
1answer
535 views

How can I replace this water pressure reducing valve?

Some of my taps were dripping slightly and it was recommended that I test the water pressure. After a few tests the pressure is 140 PSI in the house, which I understand is extremely high and I have ...
6
votes
2answers
3k views

What can I do about high water pressure that is causing a leak?

One of our showers has an intermittent leak, and I've figured out that it happens when the hot water heater is on. There's no expansion tank on the cold supply side for our hot water tank, so I'm ...
1
vote
1answer
142 views

Why do I have almost no water pressure after installing a new kitchen faucet?

I installed a Price Pfister 533 single control kitchen faucet today, and for whatever reason my water pressure is next to nothing. It was perfectly fine before. What is wrong and how do I fix it?
2
votes
1answer
270 views

How do I pump up water pressure in my shower?

I have a well system that generates approx 35 psi of flow to my shower. How can I pump up pressure to the shower?
4
votes
2answers
469 views

Can (and should) I replace the hose connecting a cold water expansion vessel to the cold water supply myself?

We recently had a small flood in our apartment. I found that the metal-sheathed rubber hose connecting the cold water supply to the blue cold water expansion vessel had a wide split in it. The water ...
3
votes
1answer
400 views

Is a water pressure booster pump with an induction motor suitable for kitchen tap use?

The water pressure in my kitchen is too low to achieve a reasonable flow rate through the kitchen tap. For many years I have fitted a series of booster pumps which are activated when water is flowing ...
45
votes
9answers
34k views

How can I improve the water pressure in my shower?

I recently purchased my first home. It has two bathrooms and the water pressure in both is less than ideal. What are some steps I can take to increase the pressure?
2
votes
1answer
177 views

How can I identify my bathroom tub faucet pressure valve?

I am looking for a replacement trim valve kit and I am having trouble finding the right one that will fit my current pressure valve. It appears to me to be a model from American Standard. Click ...
6
votes
2answers
6k views

How can I get low water pressure in sprinkler system fixed?

I have a new house that is still under warranty. Compared to at least two of my neighbors whose houses were built by the same builder and have very similar sprinkler systems, my sprinklers put out ...
4
votes
1answer
72 views

Does a larger solar water heater equate to better water pressure?

Please excuse my ignorance - we want to buy a typical slanted rooftop solar water heater for our home. We thought 200L would be an acceptable capacity, but the vendor we visited today said that we ...
1
vote
0answers
97 views

What would cause a water pressure drop after tripping a breaker?

I recently plugged my laptop into a cheap powerbar, which caused said-powerbar to short. This tripped the "sockets" circuit on the breaker, which, upon resetting, caused power to begin flowing to ...
1
vote
0answers
61 views

How should I replace these pressure reducing valves?

At my church, we have a fairly old boiler system. The system was just passed for annual inspection, but it is failing to refill after having been drained. There is absolutely no water flowing past the ...
4
votes
3answers
1k views

Will I lose water pressure going from a 2“ pipe to a 1/2” pipe then back to 2"?

I have jimmied up a pool heater from an idea on YouTube, but just expanded it. I have a water line of 2" PVC, piped down to 1/2" copper, so it can run through a coil, then increased back to 2" PVC, ...
0
votes
3answers
2k views

Why is the water pressure so high from my overhead water tank?

We have recently rented a house and it has normal taps fitte, and a normal overhead water tank, but the water pressure is very high. The water comes out with so much pressure, that if I am trying to ...
1
vote
1answer
366 views

Why does my shower have low water pressure?

The water pressure from my shower is low, we've been using it for several years but it's only in the last couple of weeks that we've had the problem. I've cleaned the showers head and hose, don't know ...
3
votes
1answer
414 views

Why do I have low hot water pressure in my kitchen?

I have very low hot water pressure in the kitchen only. I have disconnected the line and have great pressure from the valve. It is a two handled faucet and the cold water pressure is very good. ...
1
vote
1answer
351 views

How can house hot water pressure be kept stable if more than one hot tap is open?

We have a Vaillant Ecotec combi boiler in the loft. When showering, hot water pressure is fine. But if someone opens any other hot tap in the house, it massively reduces the hot water coming into the ...
1
vote
0answers
253 views

If I use (2) 3/4“ inlet PEX manifolds (hot/cold), do I need 1” PEX supply from the meter?

I am replacing all the plumbing in my house and to the meter. I will be using PEX. I have manifolds for hot and cold with 3/4" inlets and 1/2" outlets at the valves. Do I need to use 1" PEX tubing ...