0
votes
3answers
172 views

Should a water distribution manifold consist of a circular loop?

I'm replacing the copper in my house with PEX tubing and I'd like to set up my new utility room with hot water and cold water manifolds. Each connection on the manifold would then lead to either hot ...
1
vote
1answer
105 views

Will I notice a pressure drop going from 1/2“ pex to 3/4” CPVC then to 1/2" CPVC?

So I'm replacing my older CPVC piping in my house and I have access to almost the entire house except the master bath area. At first I thought it was being fed by a 1/2 inch line that I could just ...
1
vote
0answers
318 views

If I use (2) 3/4“ inlet PEX manifolds (hot/cold), do I need 1” PEX supply from the meter?

I am replacing all the plumbing in my house and to the meter. I will be using PEX. I have manifolds for hot and cold with 3/4" inlets and 1/2" outlets at the valves. Do I need to use 1" PEX tubing ...
3
votes
3answers
1k views

Is temporarily reducing the water supply line an option when installing a water softener?

I am installing a water softener in my house. Currently we're getting the water supply from 1" PEX that has a service loop in the garage. I built my own 1" PVC bypass system for a GE water softener ...