Vertical structures which usually enclose, divide, define, or protect an area.

learn more… | top users | synonyms (1)

0
votes
2answers
464 views

How would you go about installing shelves _in_ the wall?

I would like to install shelves in my wall. The wall itself is sheetrock. What tools would I need, and how would I go about it? I believe what I'm trying to do is called built-in shelving, if that ...
3
votes
1answer
436 views

What is the best way to get rid of plants growing in my walls?

In a rental unit my fiancée just leased, 2 weeks after she moved in, a vine-type weed sprouted from the baseboard in her kitchen. Upon further inspection, I was able to pull about a foot of vine ...
9
votes
1answer
643 views

How do I get to the wall cavity above a double floor joist from below?

I am running some new romex for a couple of electrical outlets. One of the outlets is on one side of a wall in one bedroom and the other outlet is on the other side of the wall in another bedroom. ...
2
votes
2answers
1k views

How do you frame a wall around existing pipes and ducting?

Adding ducting or conduit or pipes to a wall is easy, you just drill or cut a hole. Adding a wall where there is already conduit and pipes poses more of a dilemma, especially if those things are ...
13
votes
4answers
48k views

How do you know when and where it is safe to drill into a wall?

Lots of home projects involve cutting or drilling through walls (everything from nails, screws, or hooks to mount things to cutting through drywall and drilling through studs to run wire). In ...
4
votes
1answer
5k views

How do you frame a wall more than 8-10 feet tall?

I am capable of framing a "simple" 8' wide 8' tall 4" thick wall out of 2x4 lumber, then attaching plywood or drywall or OSB or any other sheet material to the frame. Making the wall wider is a ...
5
votes
4answers
697 views

How can I attach normal framed walls in between concrete columns?

I'd like to add partitions to this grid of columns. I want to make "normal" walls, framed with 2x4 and faced with plywood or drywall. My concern is how to attach the walls to the columns. Naively, I ...
3
votes
1answer
1k views

How much weight can the studs in a non load bearing wall support?

I have a non load bearing wall in my home that has a 52' inch LCD TV mounted into the studs. I think the TV weighs around 90lb I'd like to add another shelf underneath the TV to the same wall mounted ...
5
votes
3answers
2k views

How do I soundproof my vaulted townhouse wall?

I want to soundproof my wall. In fact, it's this wall: I know, right? It would probably be an enormous task, but I really want to get it soundproofed because I have a neighbor on the other side ...
4
votes
2answers
2k views

What's the best material to patch gaps between moulding and the wall?

I am installing new moulding (aka baseboards, woodwork, etc). A few of the walls sort of dip inward, so a gap is left in between the moulding and drywall. What's a good material for patching this ...
3
votes
4answers
812 views

How do I prop-up or fix a wall that is slowly moving?

In the image, the single stack of breeze blocks on the right hand side has been slowly moving away from the wall over the last 4 years. The gate latch (also on the right hand side) is now rubbing ...
5
votes
2answers
631 views

Is it possible to hang something on the wall surrounding my chimney?

My chimney runs up the center of the house from the basement. Where it passes through the kitchen, there is an obvious bulge in the wall where the wall basically wraps around the chimney. Based on the ...
3
votes
3answers
794 views

What is up with this wall, and what is the right way to hang something on it?

I just moved in to a new apartment, in a very old house. The landlord mentioned that it is over 100 years old. The walls are plaster, which means (to the best of my knowledge) that there is lath ...
6
votes
5answers
26k views

What's the best way to hang an unframed poster on a sloping wall without using something that will damage the poster?

What's the best way to hang unframed posters on a sloping wall without using tape or velcro or glue that would damage the poster? Thumb-tacks don't work too well because the poster ends up sagging ...
1
vote
1answer
425 views

Installation of Polystyrene External Wall Insulation - over old render?

I am considering installing a Polystyrene-block based External Wall Insulation system. Currently the house is blockwork with a rough render. One contractor has told be that the existing render on ...
2
votes
2answers
452 views

How do I replace ceiling drywall over cabinets?

I recently had some water damage to my ceiling after a storm. For the most part, it's a simple cut out and replace procedure, but I'm stuck wondering what to do in the kitchen. There's about 1'x2' ...
2
votes
2answers
463 views

How to remove trim caulk orange peeled wall

We're replacing the trim in our room, but the trim that is there is taller than the trim that we want to replace it with. So after removing the old trim, there's a caulk line for the original. The ...
2
votes
1answer
292 views

insulating exterior walls

I have an old house with no insulation. The walls are 2x4 with plaster and lath. The outside is aluminum siding, in good shape. I would like to blow cellulose insulation inside the wall cavities from ...
9
votes
3answers
1k views

What are some ways to appropriately hang things on a wall?

I just moved into a new house and am at the point where I need to start hanging stuff on the walls. Most of the stuff I want to hang is around the size of a picture frame, large mirror, or diploma ...
2
votes
1answer
211 views

How do I re-point an outside wall?

How do I re-point an outside wall? What tools and techniques should be employed?
7
votes
4answers
199 views

Repairing eroded plywood window casing

The interior side casing of my window has been scratched/chewed away a bit, destroying the paint and outer two layers of plywood: What's the best way to repair this? PS the source of the problem ...
5
votes
1answer
414 views

What is the best way to deal with wall tie failure?

My wife and I are considering purchasing a new house, but the surveyor says that it has wall tie failure. What is the best solution for repairing this? Is it really necessary to get the old ties out ...
4
votes
2answers
304 views

Aquarium in the wall

I want to build a wall with aquarium inside. This wall will divide my office from recreational room. Aquarium will be about 2 meters long and 0.7 - 0.9 m high. Width is about 50 - 60 cm. What ...
4
votes
2answers
10k views

How do I properly jack up one side of my house?

As I write this, I have a slight lean as I walk on my floor in some parts of my house, and it's even worse on the upper floor. In some parts upstairs, it feels almost like you have to grab something. ...
2
votes
3answers
683 views

What is the best way to seal this old fireplace vent?

I am doing some minor renovations to my basement with the drop ceiling and found that one of the geniuses that owned the house before me, used fibreglass ceiling tiles to seal off an old vent for a ...
3
votes
1answer
656 views

How to fix a retaining wall that is difficult to access behind the house?

My retaining wall needs to be fixed/rebuilt since it's leaning, but I can't get any machines back there because house doesn't have much side or rear setback(maybe 5ft on each side) and behind the ...
2
votes
1answer
338 views

How to secure a wooden box (tunnel) in a wall?

I'm going to fit a cat flap in a brick wall. My intention is to drill out a square hole through the wall. Then create a wooden (MDF) tunnel to fit inside this. On one end of the tunnel, I will attach ...
3
votes
2answers
6k views

Repairing bubbling (blown) plaster on an interior wall

I have no idea what kind of wall this is. Both my walls that are near radiators have this bubbling plaster look. I have read that painting with temperature differences may cause the bubbling (such as ...
3
votes
2answers
403 views

My kitchen has no real walls. Is this going to be a problem?

I recently redid my kitchen, which included removing the back splash and putting in new tile, but when I went to remove the old tile, I found that the tile is only attached to drywall. Knowing this ...
5
votes
2answers
2k views

How do I go about hanging a hammock?

I would like to replace my bed with a hammock. Without buying a stand I would like to know how to suspend it in the air. How exactly do I affix the ends of the hammock to the wall so it won't fall ...
1
vote
2answers
10k views

What is the best product for repairing expanding gaps in a brick wall?

I am trying to do a structural repair to a brick wall that has some large gaps - 1-3" between some of the bricks due to some foundation movement over the last 300 years. The gaps are essentially ...
4
votes
2answers
23k views

Are mounting anchors necessary for plaster walls?

I have a bathroom utility organizer I need to hang on a plaster wall. The organizer is lightweight aluminum, weighs about 5 pounds, and will be holding fairly light items such as toothbrush holders ...
3
votes
3answers
133 views

best way to install a flat wall fixture on a sightly curved wall

In our rental property, the kitchen walls are all ever so slightly curved (as are a lot of walls in our house) We want to put up a knife magnet. Obviously we are keen for this not to be wobbly in any ...
10
votes
1answer
2k views

How can I install crown cornice molding and trim on rounded outside corners?

We have rounded outside corners throughout our house what is the best approach to installing crown cornice molding? The baseboards that are currently installed just come to a 90˚ point and the gap ...
6
votes
3answers
1k views

Is there an easy way to make a square hole in plaster/brick to put an electrical outlet box in?

I am about to fix a few new sockets, I can run the cables down the back of some built in cupboards, but would rather not use surface mounted sockets. I do not have a SDS drill, just a standard ...
3
votes
1answer
3k views

What type of backer board do I need to use to attach a stone veneer around a fireplace?

I want to put up a stone veneer surround, around a gas fireplace we're going to install. I've seen everything from using 1/2" plywood and a metal lath, to putting the tiles directly on drywall. I ...
2
votes
2answers
10k views

What's the best method and product to use for patching cracks in plaster walls?

I have a 100+ year old house and while it's quite structurally sound there's been some settling over the years, leading to small cracks in the old plaster around the house. I hired a professional to ...
3
votes
1answer
2k views

Do I need to waterproof the external walls of my house?

I have just completed a renovation of my house. Where possible, I am putting decking around it to keep the brickwork dry and ventilated. One wall, however, will have sand and dirt added to build up ...
4
votes
2answers
4k views

What's behind the hard plaster walls?

Most of the walls in the old part of my house are plaster. Hard, nasty, amazingly solid plaster. While this is nice in some areas, there's others that it's rather annoying -- such as on the stairs ...
1
vote
2answers
902 views

Is there a way to build interior walls that are easy to change?

As my family grows (birth) and shrinks (adulthood), and as kids' needs change (puberty) I'd like to be able to change the floor plan to match. Conventional 2x4 studs + drywall is a bit messy to move. ...
1
vote
2answers
9k views

How does wood paneling compare to drywall?

what does wood paneling do better or worse than drywall? For example cost ease of installation ease of modification maintenance longevity fire resistance noise insulation heat insulation etc.
11
votes
4answers
10k views

Am I have trouble finding studs because my walls are lath and plaster?

i picked a tv mount from ikea. The tv itself is being mounted to some paneling which in turn is mounted to set of wooden draws. In addition, it gives you hardware to mount the panels to the walls. Its ...
1
vote
4answers
7k views

What is the best/cheapest solution for poorly plastered walls?

My house is about 50 years old and many of the walls are plaster. If done nicely I would consider this a plus but it looks like my house was plastered/painted by a a 2nd grade art class. I don't ...
3
votes
4answers
13k views

What compound is best to use when skim coating a plaster wall that had wallpaper removed?

What kind of compound is best to use when skim coating a plaster wall that had wallpaper removed. Should it be thinned with water? when would one use Toping Compound instead of joint compound. Light ...
7
votes
4answers
6k views

What is the best way to remove a non load bearing wall?

I have a wall that I want to knock out as part of a kitchen remodel. The wall is non load bearing, so its fine to take out. The question is, what's the best way to do it? I imagine there's not a ...
4
votes
2answers
5k views

Does crown direction really matter when framing a wall?

When framing a wall is it really important to have the crown of each stud in the same direction?
6
votes
3answers
5k views

How do I repair screw holes in a brick wall?

I have screw holes which were put in to support a curtain rail. The curtain's been pulled out a few times by accident, and now the screw holes are crumbling and I don't know how to repair that portion ...
5
votes
2answers
2k views

What should I consider when cutting a dryer vent hole?

Our dryer has been taking forever to dry loads so, this morning, I disassembled the vent pipe and scrubbed out all the lint. However, before reassembling the vent, I had an idea. The current vent run ...
3
votes
4answers
8k views

How do I install a receptacle box in lath/plaster wall?

I have a room with ungrounded electrical receptacles and I need to install a grounded outlet. The walls are lath and plaster. What I want to do is install a new receptacle box for the outlet. Is there ...
2
votes
1answer
272 views

How do I prepare concrete walls before applying water-dispersion paint?

I had a concrete wall painted with white water-dispersion paint. Every here and there the old paint was chipped and dark gray bare concrete could be seen. I got a can of white water-dispersion paint ...