The tag has no wiki summary.

learn more… | top users | synonyms

10
votes
4answers
3k views

Is this gas range ventilation setup dangerous?

I recently moved in to a new apartment that has a gas range and oven. I have never had a gas stove before, and so I am not sure how it should work. While cooking the other night, our Carbon Monoxide ...
9
votes
3answers
3k views

How do I maintain air quality in a newly finished basement of a 1925 home with no ductwork?

I just bought a house built in 1925 but it has just been professionally renovated, including finishing the basement as living space. The home has a boiler for radiator and baseboard heat. There is no ...
8
votes
3answers
1k views

Should a bathroom fan vent to a separate duct system?

Is it acceptable to route a bathroom exhaust fan to the return of a central air system? I'm afraid this will cause mold to grow in the air return ducts. There is currently a fan in our bathroom and ...
8
votes
2answers
12k views

What are my options for venting a bathroom exhaust fan?

I would like to install a fan in our bathroom which currently has none. However, I'm very confused regarding the best approach for this. Above the bathroom is an attic space. I have read that ...
8
votes
3answers
539 views

How can I stop interior doors from opening when exterior doors are opened?

In our church every time someone comes into the building through the main entrance, the interior main sanctuary doors come open and make it possible to hear noise from the hallway. Is there some ...
7
votes
4answers
10k views

Is there a better solution than a lint trap for venting a clothes dryer indoors?

My condo association does not allow installing a dryer vent to outdoors, so I am forced to vent my dryer into a lint trap. Unfortunately the trap I have does not catch all the dust, and the rooms ...
7
votes
3answers
707 views

Would running a band saw or cnc machine in my basement be safe?

I'd like to get a band saw and drill press but I don't have room in my garage so I'd like to put it in my basement. The problem is I don't have any ventilation to remove sawdust so would having it in ...
7
votes
5answers
735 views

Can too much ridge ventilation be detrimental?

At my house in central Texas, where temperatures can persist at 86 - 110 degrees Fahrenheit, one side is always hot, no matter how long the A/C runs. That attic space is considerably hotter than other ...
7
votes
1answer
3k views

How can I catch more lint in my dryer?

In the 3 story townhouse I'm currently in, the contractor originally built the (stackable) dryer vent to go straight up from it's location (top floor), then when it gets above the ceiling, it angles ...
7
votes
1answer
587 views

Why did an HVAC installer add this PVC pipe?

We recently had a VERY old central heating furnace replaced and I noticed that the HVAC installer added the following PVC pipe shortly before the inspector arrived: The metal vents were already ...
7
votes
3answers
2k views

Are new “low noise” whole house fans actually quieter?

I've dealt with a number of older whole house fans (10 years and older) and the one thing they all had in common was a ton of noise. Are the new "low noise" fans actually that much quieter than the ...
7
votes
1answer
3k views

Does it do any good to use fiberglass insulation if you're not going to drywall?

My attached garage is not insulated. When I look up, I see the roof sheathing. I was thinking of adding insulation to the garage. The problem is there is no attic space, so I shouldn't drywall it ...
7
votes
2answers
945 views

How do I balance air outlet/inlet valves without an airflow meter?

As my local hire shops (UK) don’t stock airflow meters, I am trying to find another way to balance our newly installed MVHR (mechanical ventilation heat recovery) system. Firstly I need to set the ...
6
votes
3answers
568 views

Why not put a vent that pushes air from the attic into house?

I have this idea, and since it seems logical to me, but I don't see it anywhere I suspect I am missing something.. so here it is: Why not put a vent that pushes air from the attic into house? At ...
6
votes
4answers
641 views

Is there a recommended vent for new roof?

I am redoing my roof. I already decided to add sofit ventilation which I currently do not have. I have gable vents, and already decided to go with normal eyebrow vents Vs ridge ventilation. Question ...
6
votes
2answers
4k views

Do I need soffit vents when I have 2 gable vents and 5 normal peak vents?

We are in southeast Idaho, have a plain simple gable roof on a 1,050 square foot floor house; the roof's pitch is not great, probably 3 or 4/12 but normal for our area. We have 1 vent at each gable ...
6
votes
3answers
4k views

What are the pros and cons of a vented vs unvented crawl space?

I find it very confusing to read and hear conflicting advice on crawl space: vent vs air seal, different ways to do insulation, vapor barriers vs not, etc. Mine currently has some moisture and has ...
6
votes
1answer
616 views

Venting the attic space during summer to cool the house

The air in my attic gets superheated during summer, from the sun baking the (clay? terracotta?) roof tiles (I live in Sydney, Australia). I have good ceiling insulation, and even put in some sarking ...
5
votes
1answer
489 views

Will combining roof venting systems cause short cycling?

I'm looking into buying a new house here in Wisconsin that has soffit vents, ridge vents and some additional static roof vents installed. However, when the home inspector came through he said that ...
5
votes
2answers
579 views

Can you have different types of vents on a single roof?

The attic of my house has serious ventilation issue and the sheathing becomes rotten. The roofing contractor suggests me to replace the rotten sheathing and install some ridge vent. His plan will ...
5
votes
1answer
151 views

What to use to funnel floor air vent in cabinent for proper air flow

I ripped the "floor" of the kitchen cabinet out to reveal that all along, my vent was funneling air like this, an open hole. The circular opening is about 6 inches across both ways. I need to funnel ...
4
votes
2answers
3k views

Why am I finding condensation in my dryer?

I live in Houston, TX (Very Hot, Very Humid). In the summertime, my dryer is dripping with water, when not in use. I do not have overly excessive drying times. My dryer is vented via an unfortunate ...
4
votes
3answers
781 views

Why does my dryer duct have such a long vertical portion?

My dryer duct follows this path: Flex duct leaving the dryer Four feet of vertical rigid steel duct down into crawlspace Eight feet of horizontal rigid steel duct, immediately below the floor Outlet ...
4
votes
1answer
707 views

How can I drill through rim joist/sheathing for a dryer vent?

I want to vent dryer through the rim joist of this home but it looks like this home has some sort of stone sheathing underneath the cedar shake. I can only see it from the basement. I can't really ...
4
votes
1answer
9k views

Is it better to vent a bathroom fan out the soffit, the side of the house, or the roof?

Working on a friend's house, we're installing a bathroom fan. He had planned to vent the fan out the closest soffit, which is only a few feet away. I'm trying to persuade him to vent it out the roof ...
4
votes
3answers
3k views

Can I vent a bathroom fan through the eaves?

I want to fit a fan in our bathroom. The easiest way to do this seems to be to drill down from the loft and put it in directly above the shower. I'm then considering running the vent (flex pipe) ...
4
votes
2answers
3k views

Can I fit an extractor fan in a window?

We have a basement flat and we suspect that the bathroom exhaust fans do not go anywhere, which causes a fair bit of damp in the flat which manifests itself as condensation on the windows in the ...
4
votes
1answer
2k views

Attic ventilation - intake:exhaust ratio vs total ventilation area?

I have decided to go ahead and install a ridge vent in my house. The only current attic ventilation is soffit venting on one side of the house. As part of this project, I am attempting to determine ...
3
votes
4answers
2k views

Should I drill a large hole through a double paned window?

I have a laundry room in the basement. There is no exhaust vent for the dryer. Currently we just open the window when drying, but this is not the greatest solution. There is a window and it is ...
3
votes
3answers
4k views

How do I air-seal a range hood flute?

My new kitchen included a new exterior flute for a new range hood. Few months later, I opened the cover for some maintanace reason and saw that the flexible flute is basically going through the ...
3
votes
2answers
383 views

Can a HVAC solve my ventilation problem?

I have a problem with my house such that with all my windows and doors closed the house smells and the air feels stale. I'm thinking of purchasing a high efficiency HVAC to vent the stale air out and ...
3
votes
2answers
141 views

How can I block this venting from rodents?

As a follow up to this question, I have two 54' x 3 " gaps running the length of an overhang in my roof supposedly for venting. I believe these to be the point of entry for some squirrels and who ...
3
votes
1answer
198 views

How can I re-use a hole in wall for ventilation?

I'm renovating my bedroom and found that there's a hole in the wall beneath the wallpaper. It was plugged, but the stuff in it was old and crappy, so I took it out. Now I've got a 20x20cm (~7.9x7.9in) ...
3
votes
1answer
452 views

With mechanical room ventilation is it necessary to have air supply in addition to extraction?

We are building three sound insulated classrooms which will be fairly well sealed. There will be no open windows so we're to use mechanical ventilation. I live in a warm country so heating isn't a ...
3
votes
1answer
264 views

How should I attach laminate foil dryer transition duct?

I've got a laminate foil dryer duct coming up from the crawlspace. I need to attach my dryer transition duct to the exhaust duct, but these really don't like to go inside one another since they're ...
3
votes
3answers
1k views

How can I improve ventilation in my room with a window fan while filtering pollen from a nearby tree?

This is a campus building in Aalto University where you have a tree about 10 cm away from the window. The Espoo city does not allow the student organisation AYY to cut down the tree. There is a poor ...
3
votes
1answer
61 views

How do I vent metal doors?

I need to vent our metal utility closet doors. 1 3/4 inch thick metal doors. Need to supply ventilation so the heat exchange water heaters will work more efficiently. Now the closets become freezing ...
3
votes
3answers
6k views

How can I insulate kitchen vent to prevent cold air blowing through all the time?

Building code requires my kitchen to have a 15cmx15cm vent (besides the kitchen cook-top vent). This vent is basically a hole in the wall that reaches to the outside. The vent has grating on both ...
3
votes
2answers
1k views

What is the process for draft proofing windows

I need to try to prevent drafts coming through and around my double glazed window units as much as possible. How can I go about detecting and sealing any leaks that are letting air through the window? ...
3
votes
1answer
334 views

Do attic vents or rafter baffles need to be as wide as the rafter bay?

What happens if the attic vents or rafter baffles don't cover the entire opening between the rafters and one or two inches of wood is left exposed?
2
votes
3answers
3k views

Should I install an exhaust fan in a new garage?

I'm having a new garage built in my home and I'm wondering if it's a good idea to have some sort of ventilation/exhaust/fan system installed while they're at it? I'm thinking of doing some spray ...
2
votes
3answers
232 views

What should I look for in a Whole House Fan

I see a lot of variance in the prices of whole house fans in the market, and not a lot of clarity or comparison between vendors and models. We're looking to buy some to install in our newly purchased ...
2
votes
1answer
211 views

How can I divert wind which is flowing parallel to the wall into the house?

Situation: The house is surrounded by other structures in a way that the the wind direction remains parallel-horizontal to the wall. There are a couple of windows on that wall, but amount of air ...
2
votes
1answer
1k views

How do I install a vent above a closet door?

I located some home theater gear in a closet directly behind our family room where the TV is located. Now the closet, a sizeable walk-in, is getting rather warm. How do I install a simple vent above ...
2
votes
1answer
280 views

Can I drywall over an exterior vent in a converted garage?

Our double-car garage had one car space previously converted into a study by a previous owner. It's a bit ugly, but a very useful space, so I'm going to make it nicer by putting up drywall ontop of ...
2
votes
2answers
151 views

Can a lower cabinet be used over a floor vent?

I didn't see this question asked after my search but I have a wall in the kitchen that has nothing against it and we are wanting to add some cabinets but towards the right of this wall, about 5' from ...
2
votes
2answers
536 views

Which alternative will be more efficient and beneficial for Bathroom Ventilation? How?

Facts: Bathroom Size: 8 feet * 8 feet * 10 feet (Height) Purpose: (1) Increase the Bathroom air freshness during use (2) Keep the Bathroom dry for the next use Note: Intermittent Extraction of air ...
2
votes
2answers
450 views

Can I move my furnace room ventilation intake closer to my furnace?

I live in a 3 story townhouse with a garage in the basement. Off the side of the garage is our furnace room. The ventilation and exhaust for the furnace goes to the roof. For ventilation (air coming ...
2
votes
1answer
355 views

How to remedy noisy air ducts?

I have forced air extraction with a duct running through one classroom then a second. The classroom which is ducted closer to the fan receives much greater air flow through its vents. To combat ...
2
votes
1answer
652 views

How do I use an air speed meter to measure air flow volume?

I can buy a Vane Anemometer cheaply but a Air Flow meter (with a cone) costs a lot more. Can I just make my own cone? What issues should I expect if I add a cone to a Vane Anemometer? How do I ...