The tag has no usage guidance.

learn more… | top users | synonyms

7
votes
2answers
1k views

How do I balance air outlet/inlet valves without an airflow meter?

As my local hire shops (UK) don’t stock airflow meters, I am trying to find another way to balance our newly installed MVHR (mechanical ventilation heat recovery) system. Firstly I need to set the ...
6
votes
2answers
5k views

Do I need soffit vents when I have 2 gable vents and 5 normal peak vents?

We are in southeast Idaho, have a plain simple gable roof on a 1,050 square foot floor house; the roof's pitch is not great, probably 3 or 4/12 but normal for our area. We have 1 vent at each gable ...
10
votes
4answers
4k views

Is this gas range ventilation setup dangerous?

I recently moved in to a new apartment that has a gas range and oven. I have never had a gas stove before, and so I am not sure how it should work. While cooking the other night, our Carbon Monoxide ...
4
votes
1answer
11k views

Is it better to vent a bathroom fan out the soffit, the side of the house, or the roof?

Working on a friend's house, we're installing a bathroom fan. He had planned to vent the fan out the closest soffit, which is only a few feet away. I'm trying to persuade him to vent it out the roof ...
7
votes
4answers
15k views

Is there a better solution than a lint trap for venting a clothes dryer indoors?

My condo association does not allow installing a dryer vent to outdoors, so I am forced to vent my dryer into a lint trap. Unfortunately the trap I have does not catch all the dust, and the rooms ...
2
votes
0answers
213 views

How do I remove mold and mildew from subfloor of a house with crawl space? [duplicate]

Possible Duplicate: Mold remediation in crawlspace House with crawl space has mold and mildew on the sub-floor. I've determined the cause is no vapor barrier and a leaky pipe and there is ...
7
votes
3answers
874 views

Would running a band saw or cnc machine in my basement be safe?

I'd like to get a band saw and drill press but I don't have room in my garage so I'd like to put it in my basement. The problem is I don't have any ventilation to remove sawdust so would having it in ...
4
votes
1answer
2k views

Attic ventilation - intake:exhaust ratio vs total ventilation area?

I have decided to go ahead and install a ridge vent in my house. The only current attic ventilation is soffit venting on one side of the house. As part of this project, I am attempting to determine ...
6
votes
4answers
912 views

Is there a recommended vent for new roof?

I am redoing my roof. I already decided to add sofit ventilation which I currently do not have. I have gable vents, and already decided to go with normal eyebrow vents Vs ridge ventilation. Question ...
2
votes
1answer
340 views

Forced air heating air inlet in crawl space

The air inlet for my electric forced air heating is a small vent on the duct in the crawl space. Although the crawl space is sealed with a concrete floor and heated (ie insulation is around the ...
2
votes
1answer
415 views

How do I deciding whether to install an attic venting system?

I live in Colorado, and the weather is starting to warm up. In a couple months, the temperatures will rise pretty high. Thankfully, I have a well insulated house (there is over 20 inches of fiberglass ...
3
votes
2answers
1k views

What is the process for draft proofing windows

I need to try to prevent drafts coming through and around my double glazed window units as much as possible. How can I go about detecting and sealing any leaks that are letting air through the window? ...
2
votes
0answers
633 views

What are good Relative Humidity and Temperature settings on an MHRV and are the settings related?

I need to configure the threshold Relative Humidity and Temperature settings on an whole house MHRV system. The way the system works is that if the RH threshold is exceeded the system increases the ...
2
votes
1answer
3k views

How to properly vent attic in windy/snowy areas to avoid snow infiltration?

To ask the other part of question: How bad is it to have wet insulation? that didn't get asked... How do you deal with homes that are in high wind and snowy areas which are susceptible to snow ...
6
votes
1answer
704 views

Venting the attic space during summer to cool the house

The air in my attic gets superheated during summer, from the sun baking the (clay? terracotta?) roof tiles (I live in Sydney, Australia). I have good ceiling insulation, and even put in some sarking ...
8
votes
3answers
3k views

Are new “low noise” whole house fans actually quieter?

I've dealt with a number of older whole house fans (10 years and older) and the one thing they all had in common was a ton of noise. Are the new "low noise" fans actually that much quieter than the ...
6
votes
3answers
5k views

What are the pros and cons of a vented vs unvented crawl space?

I find it very confusing to read and hear conflicting advice on crawl space: vent vs air seal, different ways to do insulation, vapor barriers vs not, etc. Mine currently has some moisture and has ...
3
votes
3answers
6k views

How do I air-seal a range hood flute?

My new kitchen included a new exterior flute for a new range hood. Few months later, I opened the cover for some maintanace reason and saw that the flexible flute is basically going through the ...
3
votes
4answers
2k views

Should I drill a large hole through a double paned window?

I have a laundry room in the basement. There is no exhaust vent for the dryer. Currently we just open the window when drying, but this is not the greatest solution. There is a window and it is ...
8
votes
3answers
1k views

Should a bathroom fan vent to a separate duct system?

Is it acceptable to route a bathroom exhaust fan to the return of a central air system? I'm afraid this will cause mold to grow in the air return ducts. There is currently a fan in our bathroom and ...
2
votes
3answers
254 views

What should I look for in a Whole House Fan

I see a lot of variance in the prices of whole house fans in the market, and not a lot of clarity or comparison between vendors and models. We're looking to buy some to install in our newly purchased ...
2
votes
1answer
811 views

Need to attach deck ledger to house covering a vent

I am building a deck attached to the house, and on one side I will need to have the ledger covering a section of wall that has a crawlspace vent cover. If I have a big enough gap between the ledger ...
4
votes
3answers
3k views

Can I vent a bathroom fan through the eaves?

I want to fit a fan in our bathroom. The easiest way to do this seems to be to drill down from the loft and put it in directly above the shower. I'm then considering running the vent (flex pipe) ...
4
votes
2answers
7k views

Why am I finding condensation in my dryer?

I live in Houston, TX (Very Hot, Very Humid). In the summertime, my dryer is dripping with water, when not in use. I do not have overly excessive drying times. My dryer is vented via an unfortunate ...
4
votes
2answers
4k views

Can I fit an extractor fan in a window?

We have a basement flat and we suspect that the bathroom exhaust fans do not go anywhere, which causes a fair bit of damp in the flat which manifests itself as condensation on the windows in the ...
5
votes
3answers
629 views

Why not put a vent that pushes air from the attic into house?

I have this idea, and since it seems logical to me, but I don't see it anywhere I suspect I am missing something.. so here it is: Why not put a vent that pushes air from the attic into house? At ...