I'm planning to add an appliance to my house, and will want to do a pressure test of the newly installed gas lines. My main shutoff says 175 PSI, but most of the appliance valves say either 1/2 or 5 ...
It's still in the casing, as I didn't want to remove the whole faucet. I tried lots of WD-40 and trying to tighten a little and then loosen. Someone told me to use a hair-dryer on it to heat it up a ...
We have one of those faucets with one handle which first goes to cold and then progresses to hot as you go further from off. Or, at least, it used to be that way. We went on vacation, had someone ...
How to install a 1 1/4" valve on 1 1/4" black plastic main water line from well Do I use PVC glue and hose clamps on the ridges?
How to know if the valve complies to Manufacturers Standardization Society (MSS) or not? I want to approve a valve for an HVAC project, but I don't know how.