Got the machine off craigslist. During the drying cycle it stops and shows the error. The user manual tells that with dHE error I should inspect the water supply, if the water supply is within spec, ...
I have a Kenmore 80 series washer and it recently stopped spinning and agitating and I found out it was the coupler. So I changed that and it start to work again, normally. After a week or two it ...
I recently installed a garage door opener in my new home, it is wired as such per the installation instructions. The garage was prewired with 20AWG, insulated and drywalled, and I identified which ...
I am ashamed to admit, that despite my many electrical (mis?)adventures.. I have no idea how to use a multimeter. I have installed automobile sound systems, central air air-conditioners, and every ...
I have an old gas oven that is having a temperature problem. When it's turned on, the temperature keeps rising and rising, not stopping at the set temperature. It gets up to 500+ degrees. This ...