My wife reported that our GE profile JGS968SEK1SS would not heat. I removed the igniter and it is reporting 99.1 Ohms for continuity, which seems fine to me. What other troubleshooting options do I ...
Got the machine off craigslist. During the drying cycle it stops and shows the error. The user manual tells that with dHE error I should inspect the water supply, if the water supply is within spec, ...
I have a Kenmore 80 series washer and it recently stopped spinning and agitating and I found out it was the coupler. So I changed that and it start to work again, normally. After a week or two it ...
I replaced the bulb in the oven with a new bulb and it won't light. Both the old bulb & new bulb work in a table lamp. The light stopped working after cleaning the oven. Any suggestions? Is ...