Tool (n) - 1. A mechanical device intended to make a task easier, 2. equipment used in a profession, e.g., tools of the trade, 3. Something to perform an operation; an instrument; a means

learn more… | top users | synonyms

0
votes
2answers
19 views

How to cut thick felt carpet pad?

We are installing carpeting and purchased felt pad for it. Using a utility knife, though, even changing the blades frequently, we are having a really hard time cutting it. Is there a tool, ...
4
votes
1answer
119 views

Which way should an internal star lock washer go?

I want to attach a rear basket to my bicycle and I don't know a thing about nuts/bolts. I got a plastic bag full of nuts, bolts, washers, and what I believe (according to what I could find on the ...
13
votes
1answer
1k views

What tool is a solid metal cube with dimples or half spheres on every side?

My neighbor found this metal tool in a box from his father’s workshop. It's a cube with all sorts and sizes of circles and half spheres on every edge. What is it?
6
votes
5answers
11k views

What should I consider when selecting an air compressor for the garage?

I was thinking to buy an air compressor and place it in my garage. I hate to look for change when i am at the gas station and i usually end up spending more than usual as some idiot has parked his car ...
0
votes
1answer
62 views

How long does it take to charge a Mastercraft 7.2v Cordless drill?

I dont have the booklet that came with this Craftmaster 7.2v cordless drill. I am not sure of time to charge the battery but I assume it should be at least 3 hours or more. Is this correct?
0
votes
2answers
52 views

knob of propane tank was stuck

I used the grill last year, and am planning to replace the propane tank. However, I found that I could not turn the knob. I marked the knob with red color in the following figure. I guess it maybe ...
1
vote
3answers
274 views

Is it possible to reduce the diameter of a drill bit?

I would like to know if it is possible to reduce a drill bit diameter (the body and not the shank). From times to times I need to work with dimensions that are not integer number or half number.... ...
0
votes
1answer
45 views

Are router bit imperfections normal?

I just got my first router and purchased some Freud bits for it. However, I noticed that a few of them have pitting at the base where the cutter joins the shank. Is this normal for router bits, or is ...
1
vote
1answer
48 views

What features should I look for in a small wooden shed for tool storage?

I live in Cambridge, England and I would like to buy a small wooden shed (about 4 meters square) to store my tools and a freezer but as I never bought one before I don't know the important features. I ...
3
votes
2answers
248 views

How can I trim my pegboard?

I really want to tidy up my tool closet, and step one is getting the pegboard hung back up. I'd like to mount the board on the inside of a closet door, but it is about 2" too wide for that. I've had ...
0
votes
2answers
103 views

Is sawdust really that bad for my vacuum cleaner?

My mother (who tends to be right about this stuff) says that using my non-shop-vac to cleanup sawdust will ruin the motor. I recently bought a new, fancy, expensive vacuum cleaner that was really ...
0
votes
3answers
41 views

Exactly measure lumber for cabinetry

I am working on a bookshelf which, due to the way I am building it, requires some of the pieces to be exactly measured to within 1/64th over 4-5 foot lengths. Obviously no yardstick is so accurate. ...
2
votes
4answers
265 views

How can I hold a nut underneath a deck with no clearance while screwing a bolt into it?

I have an existing deck with composite wood planks. My kids bought me a gazebo for my grill that I would like to bolt to the deck. Is there a tool I can use to hold the nut and washer in place under ...
0
votes
1answer
50 views

Wired vs Battery Impact Wrench

I was considering the purchase of a 1/2" electric impact wrench. The first application is to change out an anode rod for an electric water heater. I was looking at some online, and the torque given ...
2
votes
5answers
496 views

How do I sharpen wood lathe tools?

I've had a lathe for about a year now (I have the JET 1442 with variable speed) and love it but noticed that I really suck at keeping a nice sharp edge on my tools. I have a small bench grinder I use ...
0
votes
1answer
43 views

how can I make a HSS blade thinner?

I have a HSS blade whose size is 200mmx30mmx3mm. For some particular reason, I need to make it thinner to 2mm-2.5mm. Is there any tool or approach that I can use to archive this without too much ...
2
votes
2answers
80 views

What tool should I use to remove a screw from cramped spaces?

I don't tackle many DIY projects. But when I do, the most frustrating thing is knowing that I'm doing things inefficiently. I watch a YouTube video where the guy says it should take 5 minutes to ...
5
votes
3answers
132 views

Is it worth it to replace the stock blade of a miter saw?

I have heard that the stock blades that come with miter saws are "crap" and that you should replace the blade. I recently bought a normal consumer grade 10" miter saw (a Dewalt DW713) which I plan to ...
6
votes
2answers
3k views

How do I use precision screwdrivers?

I am talking about those small and narrow screwdrivers with a thin handle. I can't get a tight enough grip on the handle to generate enough torque to remove a small screw. Do I have to use something ...
3
votes
4answers
2k views

How do I choose more durable screwdriver bits?

I recently bought a $35 cordless screwdriver that came in a suitcase with screwdriver bits. I was in shock when the Pozidriv bit splintered after screwing only 3 1-inch screws in the leg of an ...
1
vote
1answer
104 views

What tool is used for this tight plumbing situation?

Our tub drain is severely plugged. Cannot get a snake down into it. Our crawlspace is only about 18" tall (WHY?!?), and due to both the confined space and the angle we cannot leverage the wrench in ...
18
votes
4answers
51k views

When pre-drilling for screws, how do you determine the correct bit diameter?

Suppose I want to pre-drill for, say, a 5/16 screw. How do I determine the correct drill bit diameter?
4
votes
3answers
2k views

How do you break in a new air compressor?

Just got a new craftsman air compressor (33 gal). I have read that it is important to "break in" the unit by running it with the pressurized chamber open (so that there is no load on the motor). How ...
2
votes
2answers
418 views

What kind of saw should I use for cutting thin metal?

A rather strange issue has occurred where I moved into a house and there was a lot of junk, the majority of which turns out to be useful, but there is a big set of blinds encased in a 2 meter unit ...
1
vote
3answers
2k views

How do I make a Liquid-level-indicator for an overhead sintex water tank

I have a 5000 ltr overhead tank atop a 20 meter tower. I wish to make a liquid level indicator, mechanical type, which would indicate to me the liquid level therein the tank, as the tank is made of ...
6
votes
2answers
2k views

What is the pointed end of a spud or construction adjustable wrench used for?

I saw one of these at Lowe's the other day and was just wondering what the pointed end is used for. I have seen it called a "construction" wrench and a "spud" wrench.
2
votes
1answer
82 views

Are there any advantages to using s-clips for attaching a table top instead of a right angle bracket?

I'm looking to build the "Simple, Sturdy Workbench" from Getting Started in Woodworking, Season 2 - http://www.startwoodworking.com/getting-started. The design attaches the bench top to the frame ...
4
votes
1answer
158 views

What type of tool is an “extension”?

According to this WikiHow article, one of tools needed to change a spark plug is "an extension." Is this a type of wrench?
3
votes
1answer
213 views

How can I repair a fiberglass ladder?

I have a 10 ft fiberglass step ladder that was damaged when someone used it on unstable ground. This ended up ripping one of the rivets on the middle locking brace out of the fiberglass. Anyone have ...
4
votes
3answers
511 views

As a beginner woodworker, should I buy a table saw or a band saw?

I'm just getting into woodworking and don't have any equipment, not even a bench. As a beginner looking to maybe make anything from small boxes to light furniture, should I buy a table saw or a band ...
5
votes
3answers
175 views

Is the ability to save pictures worth it in an inspection camera?

I am about to run a whole ton of communication cable in an existing two-story house, and so I am considering buying an inspection camera to help with this. As I started looking around, they range in ...
3
votes
3answers
2k views

Borescope recommendations (features)

I'd love to get a borescope, but I've never used one. Should I try to find a place to rent one first(does such a place even exist?), or should I bite the bullet and buy one. What features should I ...
2
votes
2answers
309 views

What tools should I use for hand carving and whittling?

I have been hand-carving hunting bows (ie: simple selfbows, straight backed bows, steamed static recurve tips, etc) for a couple years. I used to do all of my carving with a set of nice drawknives and ...
3
votes
2answers
6k views

How do I fix a Bostitch nail gun that is jammed?

I have a Bostitch nail gun (pneumatic) and it has been working fine all day until about 30 minutes ago. I went to nail in a piece of molding, and when I pulled the trigger I heard air feed into ...
3
votes
3answers
701 views

What tools are required to unclog sink drain with garbage disposal?

So yesterday someone in my family put some celery stalks (with the hard stems included) down the garbage disposal, after which our drain drained much slower. I tried filling up the sink with water ...
20
votes
7answers
4k views

How can I repair rusty tools?

Should I use sandpaper to clean the rust from the tools (e.g. Needle-nose pliers), or can I soak them in vinegar or lemon juice? Would I be better off just buying new tools (which can be an ...
5
votes
2answers
127 views

Is there a good way to store and organize try/combination squares?

I have a bunch of try/combination squares that I would like to store/hang in my work area but I cannot figure out a good system. Can someone recommend a good method to keep combination squares readily ...
4
votes
1answer
144 views

What painting equipment is needed to restore a derelict wooden house?

The exterior walls are in a very bad shape, and the whole house needs to be painted. It looks like this: What equipment should I get to prepare the walls and paint them?
6
votes
3answers
977 views

What is this kind of security bolt head called, and how can I remove it?

A previous owner fitted the light fitting pictured above, and has not left me a tool to remove the bolt. The bulb has blown so I need to get in to the unit. The head diameter is about 12mm and the ...
3
votes
1answer
130 views

Is it necessary to keep tools lubricated?

I've noticed that some of my tools, especially the more expensive ones (e.g., a wire cutter), come lubed. So, is it necessary to keep them lubricated? If so, what kind of oil should I use?
1
vote
2answers
122 views

Which end of an Allen Wrench should I be using?

When using Allen Wrenches (Hex Keys), I've always held onto the long end because I figured it gave me better leverage and torque. Sometimes, in hard to reach places, I would hold the short end. Then ...
4
votes
1answer
105 views

Clamp meter with armored cable

I am considering a purchase of a clap meter but its initial purpose would be to test a circuit branch that is an ancient armored cable without ground, aluminum wire, cloth insulated (the house was ...
3
votes
2answers
11k views

What are the differences between SDS, SDS Plus, and SDS Max drills?

Basically I had to use a breaker last weekend, it was clear I did not need the “heavy duty” as I did not have 6” of solid concrete, but the descriptions of the other options confused me.
0
votes
1answer
113 views

How is a finish sander different than an orbital sander?

Other than an orbital sander being circular and a finish being square, I was wondering if there are any other differences. If I already own an orbital one, does it make sense to add a finish one to ...
1
vote
1answer
142 views

Can rotary tool bits be used with a drill?

Can I use accessories like this Dremel 110 Piece Super Accessory Kit with a regular drill or impact driver? Are there any advantages of rotary tools over impact drivers? I would guess they might ...
2
votes
1answer
455 views

What drill bit do I need to screw a hex cap screw into a wall stud? The magnetic DeWalt nut driver bits aren't an exact match

I am trying to hang a TV mount into the wall studs above a fireplace. The hex cap screws that came with the mount don't fit snugly into the 7/16" nut driver bit and are too big for the 3/8" bit. ...
1
vote
0answers
79 views

How can I edge concrete without an edge trowel?

How can I make a concrete floor (also using dry shake color hardener) with a proper edge, without using an edge trowel? In Brazil I cannot find an edge trowel anywhere, so I would like to know if ...
3
votes
1answer
425 views

How to paint a wood house?

I'm looking for good resources for painting a wood house. I'm looking for the proper tools and techniques. I don't want to hire somebody to do the job, I would like to do it myself. I just need to ...
5
votes
1answer
519 views

Are there any tricks for using an oscillating multitool?

I recently got myself a Ridgid JobMax and I think I love it. I did spend quite a bit of time, however, trying to get through an old (100 year old home) 2x4 (dimensional). I don't know if the wood ...
1
vote
2answers
116 views

What is good advice for introducing kids to home improvement?

I have kids. My oldest two have done a lot of framing with me, punched holes for electric, connected electric on dead circuits... But also I am very apprehensive in letting them use some tools - ...