I have a big pile of high quality tongue and groove floorboards that I would like to reuse as decking timber for a small-ish deck. The trouble is I don't quite know what the best tools to use would ...
This is an open-ended question. I will describe the situation and outline my approach to solving the problem. I am hoping to get feedback that will help me decide if this is the right approach, ...
I have bare concrete floor that was, until recently, covered with carpet. After recently seeing a friend of mine purchase raw pine, shape the tongue-and-groove himself, and seal it to achieve a ...
My attic has tongue and groove planking down as the floor, and I need to do some work up there. I'd like to only remove a couple planks in the middle of the field, rather than pulling up half the ...