For questions specifically regarding sanitation fixtures designed for removal of human waste, generally referred to as toilets but also including urinals and bidets. Topics include designs, installation, repair, plumbing supply and drainage, and sanitary concerns including cleaning.

learn more… | top users | synonyms

3
votes
3answers
448 views

What should I know before having bathroom fixtures installed?

I recently removed the old towel rack in the bathroom (which was badly installed because it left huge holes inside and the rack was hanging and I had to literally tug it out, which took me ages!) and ...
2
votes
3answers
75 views

How to support the subfloor around a toilet between I joists

I'm replacing some rotted subfloor around a toilet, and I want to add blocking around the flange for extra support, and to give me a place to support the new pieces of subfloor (I'm not planning on ...
1
vote
2answers
39 views

How can I fix a Groaning/bubbling toilet?

Our toilet "groans" when flushed- it makes a loud noise that does not appear to be correlated with anything I can see. Also, it randomly bubbles and leaves black pulpy residue inside the bowl. Is ...
0
votes
2answers
105 views

Why does my toilet make air noises when nothing is being used?

There is no back up in sink or shower. Nothing using water is turned on. Flush handle is sometimes hard to press. Why?
0
votes
2answers
3k views

What is causing the vibrations through my water pipes after flushing the toilet?

I am getting vibration through my pipes after flushing, it is also very slow & I am finding cement pellets at the bottom of the pan
2
votes
1answer
183 views

Can I run a toilet drain on the exterior of my house?

I want to install a toilet in my upstairs bedroom. I was told that I cannot connect to the 3" vent line for the downstairs toilets. the main reason being that a vacuum will be created when we flush ...
2
votes
1answer
306 views

What kind of toilet tank is this?

This is the toilet tank in my apartment. A few days ago I started noticing brown residue in the water. Upon investigation, I encountered a toilet tank I'm not familiar with... there's an "outer" tank, ...
1
vote
1answer
106 views

Maxi Pad flushed down the toilet

I accidently flushed a rolled up maxi pad down the toilet 14 days ago at a friend's house while on vacation. We stayed at their house for 7 days and it was clogged with the pad the first day we stayed ...
0
votes
1answer
100 views

How can I stop my Geberit flushing system from hissing?

Our toilet will often go into a mood and start hissing. This will go on until I manually operate the filling mechanism to fill the tank higher. I suspect that it is somehow not filling enough and ...
-1
votes
1answer
106 views

Could a saturated drain field cause a toilet to back up?

My drain field is over saturated from excessive rain, but before I figured that out, I replaced the wax ring on one toilet due to leakage from the bottom. I also had to replace the flange and build ...
4
votes
0answers
123 views

What should I do about putty that fell in the toilet opening?

When I was lifting off the old toilet a large chunk of plumbers putty/clay fell in the opening. (There was a huge amount under the toilet, and no wax that I could see.) I tried using a vacuum to get ...
3
votes
0answers
444 views

How can I adjust the depth to which a pneumatic toilet flush button must be pressed?

We have a toilet with the cistern built into a cabinet, with a button on the front to flush it. However, it only seems to flush if you press the button right in (quite deep) and you have to do it ...
1
vote
0answers
60 views

Water draining out of pipe when usage is high.

We moved into an old house and there is something happening in the basement that I need some help explaining. Here is a image showing where the leak is happening. I've marked where the water is ...
1
vote
0answers
41 views

Glue Kohler flush valve together?

I have a Kohler toilet with a canister flush valve (part 1084017-6-A). The top of the "guide" piece in the flush valve assembly (where the hose attaches) broke off, so the toilet functions but very ...
1
vote
0answers
26 views

water in bath & kitchen sinks trickle while toilet flushes

This started after a handyman snaked a bathroom sink pipe to clear blockage. While it's possible that he did not cause the problem, it's the only thing I know of that changed just prior to its start. ...
1
vote
0answers
235 views

brand new toilet installed by plumber won't drain

Ok, I have read many questions and answers to this question, but none of them are what mine is doing. Buckets of water poured down don't go down, holes aren't clogged, all the guts in toilet work ...
1
vote
0answers
79 views

What could be causing intermittent flush issues?

I have looked at several similar questions, but I'm unable to determine the cause of this problem. Basically, when the toilet is flushing fine, after the flush, the level of water in the bowl is very, ...
1
vote
0answers
94 views

Where does the washer go when replacing this toilet seat?

I am replacing the seat on a RAK Flora toilet . The replacement parts have a bolt, to go down thru the porcelain, then a plastic wing nut, metal washer and another plastic bit which just slides ...
1
vote
0answers
33 views

How do I use flange spacers correctly?

I am putting in my old toilet after I tiled my bathroom. I have yo use a flange spacer. What should I do with the bolts in the old flange? Can't I just leave them in and use again? Or will they be ...
1
vote
0answers
73 views

How can I replace the seat on my wall-mounted toilet

My toilet seat is broken, so I've had to find a replacement. As it turns out, I need to get inside the bowl to fasten the screws that keep the seat steady. I also need to get inside there to get the ...
1
vote
0answers
193 views

How can I repair my leaky toilet?

Apparently my original toilet valves were cheap because they both had problems and I replaced both with fluidmaster valves some years ago. Two problems were apparent immediately which I solved: ...
1
vote
0answers
410 views

Quick fix for a toilet that flushes water “under” material?

I've recently moved into a rented property with a dual-flush toilet. When flushing the "new" water seems to be sent directly "under" any paper/waste thats in the bowl, causing it to "roll" over the ...
0
votes
0answers
15 views

Wall mount toilet mounting

We need to replace a wall mounted toilet. It is supported by four 1/2 inch bolts in a rectangular pattern around (presumably centered on) the outflow. The horizontal spacing is 9 inches, the ...
0
votes
0answers
40 views

quarter turn shutoff valve won't completely close

I have a quarter turn shutoff valve on our toilet that won't turn all the way off. It turns about 75 degrees and still lets a bit of water pass through. From 0-45 degrees, it feels fine, just like ...
0
votes
0answers
31 views

How to stop Tota Aquia II dual flush dribbling?

I have a Tota Aquia II dual flush toilet: Lately it has been constantly dribbling a very small stream of water into the bowl. Clearly this is wasting water and I'm trying to figure out how to fix ...
0
votes
0answers
62 views

Second Floor Toilet mystery

Toilet flushes after hours of standing but soon after refilling will not flush completely. It's as though the water meets resistance. We have snaked 28 feet multiple times, checked the roof vent for ...
0
votes
0answers
69 views

What is suggested as a way to get excess water out of septic lines?

I am experiencing septic field line failure due to my wonderful water company having a water main break in 2014. I did not realize the issue was related to the water main when I had someone out here ...
0
votes
0answers
22 views

toilet flushes then water stained again after a few minutes

my toilet flushes and the water comes through and is clear. However, five minutes later the water is yellow again as if waste has trickled back again?
0
votes
0answers
80 views

Why does my toilet fill valve never completely stop filling?

When ever I flush my toilet the tank fills to the correct height and the water looks like it stops, but then I hear a hissing noise and the tank continues to slowly keep filling until it is constantly ...
0
votes
0answers
47 views

wall hung toilet advice

So… i’ve decided to go with a walmount but ended up saving a lot of money by NOT having an in-wall tank. I instead went the flush-o-meter route and discovered there’s nothing wrong with having a 5 ...
0
votes
0answers
65 views

How to fix cable on in-wall flush toilet

I have a wall-mounted toilet with the flush mechanism in the wall. During cleaning the blue cable that connects the button to the valve was disconnected. Can somebody tell me how can I can fix it? ...
0
votes
0answers
89 views

How do I remove a broken toilet auger from my toilet?

My toilet is suffering frequent clogs that could be cleared with a plunger, but recurs the next time we send anything down. So I went and got the fanciest toilet auger at Lowe's, Cobra brand heavy ...
0
votes
0answers
119 views

Will Korky Universal Flush Valve Kit fit my toilet?

I have a Mansfield MPP 160 toilet. Picture and associated parts here: http://www.griggindustries.com/page277.html The fill valve is broken on it and needs replaced, but I cannot find one locally. For ...
0
votes
0answers
67 views

How can I open this old push-button cistern?

I have a push-to-flush cistern that I cannot open. It seems to be quite old and I cannot find a manufacturer anywhere on it. I've removed the smaller button, and there are three small holes. However, ...
0
votes
0answers
113 views

Toilet flushing and hot water pressure problems

I have a dual flush toilet that flushes very well some of the time. However, about 50% of the time, when the toilet is flushed and then the hot water faucet is turned on, the hot water pressure dies ...
0
votes
0answers
159 views

How can I clear my toilet trap of the chlorine smell every time I flush?

Need some advice on the best and safest way to clear my toilet from chlorine gas smell. I think it must be stuck in the trap.
0
votes
0answers
405 views

How to seal new PVC to old Lead pipe “toilet bend”

I have an old toilet flange which was a brass ring on a 4" lead bend that connects to the main cast iron stack. The old brass flange ring corroded and broke. I found a nice PVC fitting that fits ...
0
votes
0answers
154 views

grohe toilet cistern fitting (skate air wall plate)

we have a GROHE ,skate air wall plate fitted in out toilets and the wires have come off and its so difficult to see the concealed unit . Is there any manuals or instructions so i can try to get the ...
0
votes
0answers
148 views

How can I fix my loose toilet seat?

I have a toilet seat that has little by little, become very loose. I have searched the internet and found I had to tighten the two twisting things underneath the toilet bowl, in the back. They are ...
0
votes
0answers
614 views

Toilet water level lowers when other toilet flushes

I finally have 2 upstairs toilets working after a lengthy bathroom remodel. What I noticed is when one toilet is flushed, the other toilet water level goes down, almost all the way. The lower level ...
0
votes
0answers
253 views

What thickness Styrofoam should be used to insulate a toilet tank?

So, based on my question here, I like the idea of insulating the inside of the toilet using Styrofoam because it seems more interesting/fun than installing a mixing valve. I plan to use silicone caulk ...
0
votes
0answers
66 views

How do I remove the vacuum behind my toilet's flapper valves?

Over the last 12 months, the toilets in my condo have becomes progressively harder and harder to flush. Once the flapper valve finally releases, they flush just fine, but it's getting them to release ...
0
votes
0answers
459 views

Why won't my toilet flush?

A sewage pump in my basement is 7 feet from the shower drain and 2 feet from the water closet. The only vent is from the sump pump which runs 20 feet horizontally to an outer wall then goes ...
0
votes
0answers
102 views

Wax rings flange is to large for the floor drain?

When trying to install a new wax ring with the plastic flange, the plastic flange did not fit in the floor drain hole, is that normal? Should I use 1 or 2 wax rings with out the flange?