For questions specifically regarding sanitation fixtures designed for removal of human waste, generally referred to as toilets but also including urinals and bidets. Topics include designs, installation, repair, plumbing supply and drainage, and sanitary concerns including cleaning.

learn more… | top users | synonyms

0
votes
1answer
126 views

Toilet started wobbling

My brother-in-law (need I say more?) installed a new toilet over a ceramic floor. After a year, perhaps, the toilet wobbles a bit when you sit on it and, occasionally, you can hear porcerlain on ...
3
votes
1answer
520 views

Plumbing alteration has created vacuum in upstairs toilets

Prior to my bathroom remodel, I had a toilet flange moved in my basement to a standard 12" rough-in, since the toilet was about 5" off the wall and looked silly. The problem I have now is a vacuum in ...
0
votes
2answers
107 views

US Toilets and clogging

So I am from the UK and will be moving to the US soon. Now, everytime I am in the US I seem to be, embarrassingly, clogging up the toilet. I honestly have no idea how. I tried different techniques ...
0
votes
0answers
54 views

toilet makes loud banging noises when flushing

My toilet makes a loud thumping noise in the top reservoir occasionally. Occurs when it has not been flushed for a few hours. Top tower of stem does stick up some but I don't think cover lid to tank ...
0
votes
1answer
155 views

How to remove block of concrete under old toilet

After removing a toilet, I have discovered that there is a block of concrete underneath, which needs to be removed before installing the new toilet. What is the best way to get rid of it? Would ...
1
vote
1answer
158 views

What is the purpose of this piece of a toilet fill valve?

I was replacing a toilet fill valve last night, and after it was all done, I noticed the following item sitting in the basin I had placed underneath: It looks unused, so I'm assuming it fell out of ...
3
votes
4answers
3k views

What is the proper procedure for replacing rusted toilet anchor bolts?

I have a 1.6 gallon American Standard toilet that rocks a little from side to side. Upon closer examination, it looks like at least 1 (or both) of the anchor bolts are loose (they had corroded ...
0
votes
0answers
271 views

How to seal new PVC to old Lead pipe “toilet bend”

I have an old toilet flange which was a brass ring on a 4" lead bend that connects to the main cast iron stack. The old brass flange ring corroded and broke. I found a nice PVC fitting that fits ...
0
votes
0answers
95 views

grohe toilet cistern fitting (skate air wall plate)

we have a GROHE ,skate air wall plate fitted in out toilets and the wires have come off and its so difficult to see the concealed unit . Is there any manuals or instructions so i can try to get the ...
1
vote
1answer
57 views

What does it mean to “re-tank” toilet?

My contractor included "re-tank" toilet in work that he said he had completed in a list of works to be carried out, but we are still having leaking. What does re-tank mean and how do I know that its ...
2
votes
1answer
402 views

What to do about toilet overflow tube higher than allowed level on new fill valve?

I'm trying to replace the fill valve of a toilet that's missing some parts and I've run into a snag. I bought a Fluidmaster universal fill valve, and the instructions say that the top of the overflow ...
1
vote
1answer
162 views

Why isn't my new toilet flushing system working as well as the old one?

We just replaced the whole system in our toilet. It use to have a flushing ball valve and it worked great until it broke. It flushed everything down the first time no problem. Now with the new ...
2
votes
0answers
95 views

What should I do about putty that fell in the toilet opening?

When I was lifting off the old toilet a large chunk of plumbers putty/clay fell in the opening. (There was a huge amount under the toilet, and no wax that I could see.) I tried using a vacuum to get ...
1
vote
1answer
70 views

How do I make sure I get a replacement toilet tank that fits the bowl?

Our toilet tank suddenly cracked with no warning--a giant crack from handle to base. Luckily we were home and were able to turn off the water / flush before too much leaked out. Now I'd like to ...
2
votes
2answers
157 views

Why is there a drip after I replaced toilet innards?

I replaced the innards of my toilet with something like this, all went well. The toilet works, etc. It involves undoing the water pipe, replacing insides of toilet, then screwing the water pipe back ...
0
votes
1answer
3k views

Why does my toilet feed service valve still leak?

The metal pipe that comes out of the wall and feeds water into the cistern on my toilet is connected to the plastic cistern pipe (inlet valve pipe?) by a service valve. It is pretty much identical to ...
0
votes
0answers
97 views

How can I fix my loose toilet seat?

I have a toilet seat that has little by little, become very loose. I have searched the internet and found I had to tighten the two twisting things underneath the toilet bowl, in the back. They are ...
0
votes
0answers
276 views

Toilet water level lowers when other toilet flushes

I finally have 2 upstairs toilets working after a lengthy bathroom remodel. What I noticed is when one toilet is flushed, the other toilet water level goes down, almost all the way. The lower level ...
5
votes
4answers
2k views

Should I replace my toilet's wax ring when I see moisture around the base?

I am noticing moisture around the bottom of the toilet, and can tell some moisture is staining the wood floor when viewed from the basement. The bolts holding the toilet are easily tightened. Will ...
0
votes
1answer
51 views

Replaced toilet valve & tube, turning water back on rumbles

I replaced all the parts in my toilet, and now when I go to turn my water back on (not the main valve, but the toilet valve) the pipeline starts to rumble/shake a lot about halfway on. I then turn it ...
4
votes
3answers
1k views

Toilet flange conundrum

We are remodelling our bathroom and installing a new toilet. When we took the existing toilet off, we found the cast iron flange was broken, brittle and in need of replacing. We could maybe get away ...
0
votes
2answers
559 views

How do I prevent mobile home flexible water lines from freezing?

I have a 2009 mobile home. It has a flexible water feed line going to the toilet that freezes in very cold temps. I have been told these lines won't break if they freeze. They will just expand and ...
1
vote
3answers
794 views

Bubbles in toilet, gurgling sound coming from kitchen sink

So, all of a sudden, I have big bubbles coming out from my toilet bowl when the washing machine is pushing water out. Thinking it might be a clogged toilet bowl, I took the plunger to the bowl. I ...
2
votes
1answer
85 views

My toilet backed up with no water

I live in an old condo apartment. My toilet just backed up. It backed up several times before and I managed to unclog it every time, but it's nothing like I've seen before this time because I don't ...
2
votes
2answers
253 views

What should I know before having bathroom fixtures installed?

I recently removed the old towel rack in the bathroom (which was badly installed because it left huge holes inside and the rack was hanging and I had to literally tug it out, which took me ages!) and ...
0
votes
0answers
161 views

What thickness Styrofoam should be used to insulate a toilet tank?

So, based on my question here, I like the idea of insulating the inside of the toilet using Styrofoam because it seems more interesting/fun than installing a mixing valve. I plan to use silicone caulk ...
6
votes
3answers
2k views

How can I eliminate condensation on my toilet tank?

My toilet is getting a great deal of condensation on the tank and dripping onto the floor. What can be done to address condensation on the exterior of a toilet tank?
1
vote
1answer
269 views

How do I repair damaged enamel inside my toilet bowl?

There is an area of enamel missing on the bowl of my toilet - just beneath the natural water line. Is it possible to repair it with radiator enamel, or by some other method?
1
vote
3answers
3k views

How do I replace this toilet shutoff valve?

I need to replace a toilet shutoff valve (does not completely stop water flow) as part of process of fixing a leak I saw around the base of my toilet (suspect i need new wax ring??). I bought a new ...
0
votes
2answers
201 views

How can I connect a CPVC pipe to a chrome fitting for a toilet?

So I ran some CPVC pipe to a new toilet. I'm curious about the last hook up to the toilet. I got a threaded female chrome to thread on a male cpvc fitting, but it seems like the threads won't fit ...
9
votes
1answer
1k views

How do I install an in-wall tank (wall-hung toilet) with the stack in the way?

Every toilet I've ever worked with (not many, I admit) has a stack in the wall directly behind it, including mine. I'm re-doing my bathroom and I'd like to install a wall-hung toilet. I have 2x4 ...
3
votes
1answer
294 views

Temporary toilet installation

I need to install a toilet in a my house while it is being built. The floor isn't ready yet and won't be for at least a couple of months and right know it is a rough concrete slab. Since the soil ...
0
votes
0answers
54 views

How do I remove the vacuum behind my toilet's flapper valves?

Over the last 12 months, the toilets in my condo have becomes progressively harder and harder to flush. Once the flapper valve finally releases, they flush just fine, but it's getting them to release ...
1
vote
1answer
3k views

How can I fix a wall-mounted toilet that keeps running?

Our wall-mounted toilet keeps running. It is easy to "stop" by removing the plate with the push-buttons and pressing down the cylinder (valve?) inside, but I'd like to find an actual solution :) It's ...
2
votes
0answers
305 views

How can I adjust the depth to which a pneumatic toilet flush button must be pressed?

We have a toilet with the cistern built into a cabinet, with a button on the front to flush it. However, it only seems to flush if you press the button right in (quite deep) and you have to do it ...
3
votes
1answer
8k views

Why does this toilet fill valve leak around the top?

I have a pretty new dual-flush toilet whose fill valve suddenly started leaking for no reason. A picture of the toilet is below: Basically, the toilet flushes normally once the button is pressed. ...
0
votes
0answers
319 views

Why won't my toilet flush?

A sewage pump in my basement is 7 feet from the shower drain and 2 feet from the water closet. The only vent is from the sump pump which runs 20 feet horizontally to an outer wall then goes ...
4
votes
2answers
7k views

Why does my toilet make a high pitched whine when it refills?

When my toilet is refilling with water,it makes a very high pitched whine. Any suggestions on how to resolve?
1
vote
1answer
835 views

Why won't my toilet hold the refill water?

I know there are several posts on toilet fill valves and supply lines, but I'm afraid that my issue may be much worse. My toilet was draining slowly so I got a professional grade auger and ran it ...
0
votes
2answers
2k views

What is causing the vibrations through my water pipes after flushing the toilet?

I am getting vibration through my pipes after flushing, it is also very slow & I am finding cement pellets at the bottom of the pan
3
votes
4answers
310 views

What is the easiest way to tear out a bathroom subfloor?

We recently did some remodeling, and in the process, managed to hook up the toilet in the bathroom to the hot-water line. The trouble is, we discovered this fact after we had already put down the ...
1
vote
1answer
118 views

Can a cracked toilet be permanently repaired?

So I broke the entire corner (top to bottom) off of the tank on my toilet. The toilet was inherited by me in house, which was a foreclosure. It is a one-piece that is valued at $1450. I was ...
3
votes
1answer
126 views

Is there a simple way to retrofit an existing toilet with a top-mounted sink?

I'm looking for a toilet with an integrated sink. I've seen them on rare occasions: flushing the toilet activates the sink, which re-fills the toilet and tank using the water that drains through the ...
1
vote
1answer
137 views

Why isn't my Fluidmaster installation working correctly?

I have tried two brand new fluidmaster toilet valves. It is very inconsistent. Sometimes it doesn't allow the tank to fill, sometimes the floater does not engage causing perpetual flowing of water, ...
0
votes
0answers
79 views

Wax rings flange is to large for the floor drain?

When trying to install a new wax ring with the plastic flange, the plastic flange did not fit in the floor drain hole, is that normal? Should I use 1 or 2 wax rings with out the flange?
2
votes
1answer
136 views

Is there anything wrong with leaving toilet tank below waterline?

In troubleshooting a problem with recurring flushing (turned out to be a worn out flapper) I lowered the tank water level to about an inch below what the manufacturer marked as the waterline. Flushing ...
4
votes
4answers
829 views

Why are all the toilets in my house running intermittently?

All of my toilets in the house have started to run intermittently. Is there something wrong with the plumbing or could it be that the flapper has gone bad on all the toilets at the same time?
3
votes
1answer
220 views

What is the “warm water method” of clearing a clogged toilet?

In this question the OP mentioned that, when having problems with blocked toilet, as his first attempt he tried warm water method. I would like to ask: What is warm water method? For which ...
3
votes
1answer
1k views

How do I make a new toilet tank on an old bowl flush properly?

Problem / symptoms: I've bought a new water tank (nothing fancy inside, just what I'd describe as "the usual, run-off-the-mill mechanism"*), but it doesn't flush properly, as it doesn't release enough ...
0
votes
1answer
325 views

Does my toilet have a manufacturing defect?

I purchased a Kohler toilet about 6 months ago for my bath remodel. I finally got the bath finished after a sequence of delays. The toilet is about 1/8" off level in the rear (see photo) and rocks ...