1
vote
4answers
53 views

Imperfectly cut tile (4mm short) within acceptable range of error?

Recently we had a tiler who tiled the backsplash in our kitchen. He had to cut a tile to fit right below the extractor fan (hood). And he grouted the space between the top of this tile and the ...
0
votes
1answer
52 views

The best kind of tiles for using on floor and walls

I'm in the process of doing up a room in my home for short term rental. It is a small room, and approximately square; about 12.5 ft by 12.5 ft. This room is on the edge of a building; we normally ...
2
votes
1answer
100 views

Is the thickness of glass tile important in pool installations? If so, would thicker be better?

I have a gunite pool which desperately needs resurfacing. I'm seriously considering going with glass tile mosaics for the entire thing. What I'm somewhat confused about is whether I should be looking ...
0
votes
1answer
387 views

White thinset on a light marble tile - tile turned dark - will it lighten?

I tiled my shower niche last night, this is my first step tiling the bathroom, today I'll move on to walls etc. I used white thinset, and some portions of the tile turned dark after installation. I ...
5
votes
2answers
2k views

What should I do about this gap between the tub and tile?

anyone have any ideas what to do with the front edge of the tub. My tub is rounded on the front top edges. I have about a half inch gap. Looks to small to cut and mortar in a triangular piece of ...
8
votes
2answers
11k views

Should the backer board be in front of or behind the tub flange?

I'm installing a new bath tub and shower. I've removed the old tile down to the studs. Should the backer board be in front of or behind the tub flange? I put it on the rear tub wall from floor to ...
3
votes
1answer
544 views

How can I fix/polish a slate tile imperfection after it has been laid down and grouted?

Our contractor laid down a tile on our renovated bathroom and somehow did not realized that it was defective (see picture). The defect is some sort of metal mineral (kind of rough) the kind that ...
6
votes
2answers
10k views

can you glue tile to plywood?

I have a contractor who covered my bathroom with marble tile. Now tiles are cracking, grout is breaking and water leaking... See image of a few he picked up that were making noise. Also note he ...
1
vote
2answers
25k views

What type of tile should I install in a bath/shower surround?

I am about to remodel our bathroom. Currently the tub/shower is all tiled but the backing is not secure/stable so there is cracking in the grout and I know water is getting behind. I prefer the look ...