On a recent trip up into my attic, I found out that the air conditioner was blowing cold air into the attic. In several places at the AC unit, the foil tape had become unsealed. In the interest of not ...
I'm replacing the bottom 12" of Sheetrock after water damage. The existing drywall is textured. How do I tape it? Do I have to sand off texture for 6" and then tape it and texture?
In the past, I've used duct tape on cables (e.g., Power, LAN). For instance, I taped cables to a wall, I taped cables together for storing etc. The taping often failed after some time: The taping ...
So we had a bathroom tap that looks pretty much like this: the red lines I drew are where the tap has a kind of screw joint that separates the head from the side hot/cold taps. The problem is the ...
Is it common for professional drywallers to tape narrow corners, but not mud over the tape if it's going to be covered with moulding?
Sorry to spam SE with questions relating to a job done by a company I hired to finish the project in my room, but some things seem very questionable to me. In the below pics you will see a narrow ...
We just finished texturing our ceilings with a knock-down texture, however the following day we noticed wide grid-lines in the ceiling everywhere we taped and mudded. We did not prime/seal the ...