I live in a house built in 1981 that has 16 inch spaced floor joists. In wanting to retile the bathroom I have discovered the plywood all around the toilet flange is junk, it expands about 12 inches ...
When Laying Tongue and Groove plywood over 1x6 subfloor, do I lay it with the grain perpendicular to the floor joists or to the 1x6 boards underneath?
I am redoing a bedroom and I am in the process of installing a new sub floor. I currently have 1x6 running perpendicular to the floor joists. Some do have a bit of give to them. I am laying over that ...
I have 3/8 inch particle board which I am screwing and gluing down to 5/8 plywood. How close together should the screws be?
Getting ready to have some hardwood (12mm laminate, technically) installed in our dining room, and in preparation for this, I bought some 1.25" stainless steel screws that I'll be putting down through ...
My subfloor is squeaky, and there's a small window of opportunity I'll have to fasten it down before/during my carpet being replaced. I have available to me a nice corded drill, and an air-powered ...