I want to put up a stone veneer surround, around a gas fireplace we're going to install. I've seen everything from using 1/2" plywood and a metal lath, to putting the tiles directly on drywall. I ...
Epoxy anchor is essentially a metal alloy rod set onto epoxy. A hole is drilled and cleaned, then epoxy is put into the hole and the rod is inserted into the hole and left until epoxy sets. Using ...
I recently bought an under-counter kegerator and need to have some holes drilled in the granite countertop for the tap. The template and mount has 1.75" hole in the center (to run the beer lines) and ...
I have stone-and-cement retaining walls on two sides of my sloped driveway; they're new, and have cement caps. There's a long wall on the side of the driveway that's sloped about 1:20, and at the ...
I have flood vents in-front and behind my raised house, which sits on a crawl space. I would like to put a raised garden in the front of my house. Is it acceptable to do this if I create an opening ...