The tag has no wiki summary.

learn more… | top users | synonyms

2
votes
1answer
862 views

How to patch a hole in stained wood (oak) so that the patch material matches the wood as close as possible?

I drilled a 1/2" hole into a stained oak board and I want to fill it so that it's as minimally noticeable as possible. Here are the three options I've found so far: Wood putty. This means I'd have ...
3
votes
3answers
10k views

How can I “stain” wood white?

I am building a shelf similar to the one here, but mine is going to be against a dark wall. I think it would look nice if I could paint the wood white, but still allow the texture to show through. (I ...
3
votes
4answers
3k views

How can I remove water-based emulsion paint from paving slabs?

On painting the bedrooms in our new house, we've gotten some (mainly) water-based paint on some of the paving slabs on the patio. A little of it may be oil-based gloss we used for skirting boards, but ...
2
votes
2answers
484 views

What wood protection should I use for a kids swing set in the desert sun?

I recently acquired this kids play-set which is all plastic except for the wood bars on the climbing net - see below: I've read the answer to this question but am still unsure about what I should ...
2
votes
2answers
626 views

How to remove yellow blotch from MINWAX Stainable Wood Filler on pine wood

Before staining the pine wood siding of my balcony, I used MINWAX stainable wood filler to cover nail holes and knot cracks. The holes are filled alright, but there is a yellow blotch where the ...
1
vote
2answers
484 views

Can I apply stain to an oil treated oak counter top?

I purchased a counter top that was pre-treated with one coat of wood treatment oil at the factory. Can it be stained and varnished ?
7
votes
2answers
1k views

How can I remove a coffee stain from carpet?

Recently a cup of coffee was spilled on the carpeting of our home. We tried to get the stain out with a chemical solvent to no avail, and called in the experts. Unfortunately due to our preprocessing, ...
12
votes
1answer
17k views

How should I clean and repaint a painted wooden deck?

My deck appears to have been painted with just a single layer of paint, which is now peeling off. I like the look of the paint (when it's in better condition, of course), and am uninterested in ...
2
votes
2answers
4k views

How can I clean and dry a lambswool applicator quickly?

I'm refinishing my floor, sanding / stain / poly. One of the most frustrating things is clean up. In particular, the lambswool applicator. It cleans with mineral spirits but it takes forever to dry. ...
6
votes
2answers
2k views

How can I remove wax from a wooden counter so I can resurface it with Danish oil?

A wooden (beech) kitchen counter has been treated with cheap wax in the past, and is now discolouring because of food preparation and constant splashing. I've decided to make a better job using Danish ...
3
votes
1answer
3k views

How can I remove rust stains from clothes?

While I was cleaning all my rusty devices and equipments, I got some nasty rust stains on my cloth. Then I remember that I had some old clothes that I can use to clean these rusty devices and ...
4
votes
1answer
359 views

Should oil, spirit or water based stains be used on Medium-density fibreboard (MDF)?

I've made a recording desk out of 18mm MDF. What type of stain and varnish would you recommend and would it need a sealer coat applying first. All advice appreciated.
6
votes
1answer
313 views

How to repair a door with patches of stripped-off finish?

I was trying to replace the door knob on the bathroom door and for some reason the existing hole was too small so I enlarged the hole by clamping a piece of wood to the door and drilling though. I ...
2
votes
1answer
637 views

Does pickling wood with steel wool and vinegar harm the wood?

I love the look produced from pickling wood with steel wool and vinegar. See this example for details. I am hesitating to actually do this on a raw ready-to-finish table because I fear the steel ...
5
votes
4answers
29k views

How do I remove excess wood stain that dried before I could wipe it off?

While staining some wood, we had an emergency and had to leave. The stain has now dried and I'm not sure how to remove the excess; it's normally wiped off before it dries. When I get home I'm going ...
4
votes
1answer
367 views

How can I thicken Acid Stain myself?

I have been doing a lot of decorative concrete around my house, and I have yet to find a masking tape or caulking or anything that can hold the acid stain where I want it. I finally found something ...
3
votes
3answers
10k views

Desk still tacky 2 weeks after finishing it with a polyurethane clear coat

I've recently built a standing desk out of sandply with a mahogany veneer. I have stained it, and 2 weeks ago added a polyurethane clear coat to protect the stain. However, after doing this, the desk ...
0
votes
1answer
211 views

Preparing a deck & playset for re-staining

The question asked here is pretty much similar to mine except that there are few splinters and chipped wood on the deck. How to smooth those out? Also there is a kid's play structure (with steps and a ...
2
votes
2answers
329 views

Stain vs paint maintenance

I am removing paint form a wood fence door (paint was not primed it seems). The paint was peeling and I wanted to get this door done. Very painful (process of removing paint). I thought stain is ...
2
votes
1answer
241 views

Used wood stain on a coffee table and it dried with spots?

I read the instructions on the can and it said to let it sit for at least 8 hours. I stained it last night and when I checked this morning it was looking great. But I just checked now and it appears ...
1
vote
3answers
16k views

How to prepare previously stained trim / baseboard for painting?

We have a few rooms of dark stained trim, casing, and baseboards that we would like to paint white. I am pretty sure it is oak, I have not seen it to be sure at this time. It has already been taken ...
4
votes
3answers
12k views

Applied stain to deck and still not dry after a week, what can I do?

I decided to restain my deck last week since it was looking pretty worn after a New England winter. The deck is only 1 year old since we bought new construction. I contacted the builder and purchased ...
7
votes
2answers
2k views

How can I get a stain to match on two different species of wood?

I have a plank of hardwood poplar, and I want to have a piece of decorative trim along the edge made of a different wood (probably just pine, or maybe balsam). Is there anything I can do to get a ...
5
votes
5answers
14k views

How do I make a deck glossy?

I went to Home Depot and Sherwin Williams and I was unable to find a deck stain that looked like the shiny blondish color of the following image: At Sherwin Williams they said that their stains ...
4
votes
1answer
2k views

What is the difference between various wood sealers?

I've recently become aware of the existence of various seals for wood. I'm lead to believe that they are necessary, but I am unclear on the differences between the types of sealers you can find: ...
3
votes
3answers
986 views

Do I need to sand this unfinished table?

I've gathered that the step immediately before staining a table is to sand it. However, I wonder how to tell when the table is smooth enough? Can I skip the sanding step? In my case I bought an ...
4
votes
1answer
290 views

'Painter' stained our expensive beams incorrectly. What are the options for fixing?

We have two really big beams (18"x4"x30' and 18"x4"x10', cedar) holding up our vaulted ceiling. We had a company out who had a painter stain these for us. It was pretty evident right away he didn't ...
8
votes
2answers
1k views

What are the proper steps for staining a deck?

My deck just past its 10-year mark and is starting to look quite tired. It's time to restain it. What steps do I need to take to make sure I do everything right, from start to finish?
2
votes
3answers
1k views

Can I varnish natural wood trim before installation?

When I'm installing painted trim -- baseboards, window or door trim, etc. -- I usually prime and paint it before installation. That way I only have to fill the nail holes, sand smooth and paint one ...
4
votes
5answers
18k views

How do I stain pine without streaks or blotches?

I did some test staining on pine scraps, and I ended up with a cross grain arc that's darker than everything else. Where did I go wrong? (Or is it just the pine?) (Related to this question, as a ...
2
votes
1answer
235 views

China bristle paintbrush stiff from oil based paint and varnish

I have used high quality china bristle paintbursh for various projects over the years. It was used for some exterior oil based paint, but mainly it has been used to varnish various hardwoods after ...
3
votes
5answers
9k views

What is the best way to remove and prevent leaf stains on concrete pavers?

We have a brand new paver stone walkway/patio. To my dismay, I noticed that their were leaf and acorn stains from the oak tree in the front yard. I've learned my lesson and I'm going to try to keep ...
7
votes
2answers
836 views

How long can I wait before staining a new deck?

I just moved into a new (well, old) house. The previous owners put in a deck probably about 1 year ago. It's treated lumber, but they hadn't yet stained it. Winter is approaching quickly here in ...
5
votes
2answers
6k views

How should we sand and treat our Victorian floorboards?

We have recently bought a new house, well a new old house. It dates from 1900, we have taken the carpet up ad are now looking to sand back the exposed original floorboards. We plan on giving the ...
9
votes
4answers
3k views

Can paint/hardware stores match stain like they do paint?

I know you can take a color sample to a paint store (or some hardware stores) and get them to match it and mix you up a custom batch. Is a similar service provided anywhere for stain? The color ...
4
votes
1answer
322 views

Options for Hardwood Floor Scratch and Gouge Repair

I have a 10 month old puppy who recently discovered her (apparent) love for the taste of wood putty. There was a rather large knot hole that had been plugged and finished in our living room floor that ...
5
votes
2answers
605 views

Sealing pressure treated deck, to be stained later on

I have just finished building a deck from pressure treated lumber. We've put the deck to use immediately and having all our meals on it. I'm worried about greasy food morsels staining the deck. My ...
5
votes
2answers
3k views

How should I paint cedar and pressure-treated pine?

I recently built a fence from white cedar (pickets) and pressure-treated pine (posts and rails). I have been told that I need to wait before painting or staining the fence in order to give the cedar ...