In my lawn sprinkler system, one of the PVC lines starts off at a normal depth around 6 inches but slopes down and ends up 2 feet down and leads to nothing. The pipe just ends, not even capped off. It ...
I'm cementing some schedule 40 PVC pipe using the best instructions I could find ( http://www.tchristy.net/pdf/ChristysTechManual_v5_English.pdf ). The outside of each joint looks fine, but inside ...
I've been retrofitting an existing PVC irrigation system around my house. Part of that work requires that I work in shallow holes adding T joints and elbows in places where there were none before. In ...
I have a 3/4" PVC sprinkler system, and one of the nipples has snapped off inside the 1/2" threaded fitting. I have a nipple extractor which has worked very well in the past but I guess this time I ...