I've built some Board-N-Batten shutters and am ready to hang them on the house. However, I've never installed shutters before, so I want to be sure I install them properly. Do I drill pilot holes in ...
I have this kind of fastener on my shutters and it seems that every 3-5 years I am buying a new shutter because they break off and the shutter gets torn up in a storm or I am trying to liquid nail ...
The staple or brad that connects the control bar to several of the shutters have come off. Some of them are completely lost. How do I repair this?
I have a brick house and my wife and I want to install plastic shutters and wooden window boxes on some windows. I know that the shutters will not be heavy load bearers, but the windows boxes will be ...
I have a motorised shutter and I need to buy a in-wall switch to automatically stop when the shutter reaches the floor or the ceiling by only one push and not keep holding the switch.
What type of timber would you use to construct the formwork (shuttering). There seems to be 4 different types that I could use. Planed Sawn Untreated Sawn Treated Carcassing My particular ...
I've recently been working on making my own "open board and batten" shutters out of cedar pickets. I've completed making them. I didn't want to use shutter hinges, so I bought a pack of deck screws ...