I would like to mount a fairly heavy shelving unit (~150lbs) to a wall with a number of L-brackets. It being a shelving unit, I would be putting all kinds of books and random stuff on it, thus ...
I just built a shelf for a bedroom based on instructions found at Happy at Home. Problem is: the blog doesn't explain how to hang it! Can someone help me figure out a clean way to hang this shelf ...
I have removed several old and moisture damaged built in storage units from my house. I would like to replace them with shelving. There are a number of different sized gaps (width and depth to fill). ...
I have a set of cupboards with shelves that adjust in height, by means of moving pins that hold up the shelves to different holes: Unfortunately, for some reason, whoever made the cupboards didn't ...
I am hoping this isn't too wide of a topic since garage storage can vary greatly from person to person depending on what's being stored. In my case, I will be storing power tools like my circular ...
I'm not experienced in DIY beyond being able to paint stuff. However, recently I've been let down by a number of carpenters and I've decided to build myself some box shelves and want to get an idea ...
I want to build shelves into an alcove, but the corners are not square. What is the best approach to this?
Moving into a new apartment in a couple weeks and I'm planning on making the classic brick and plywood shelves to put books and stuff. Any tips for me? Do I have to have it secured to a wall?
I'm trying to use a toggle bolt, but the combined thickness of the plasterboard (~30 mm) and the shelf bracket (22 mm) means that the toggle won't push through far enough to spring out and grip the ...
The ends are secured, so how much load can a 6' span of SPF 2x4 support when turned on 3.5"?