I'm installing a number of wire shelves in a garage, but the feet don't adjust far enough to compensate for the slope. Aside from bricks or other shims, what are my options for leveling these ...
building garage shelving, already ordered lumber: 4x4 8' post 2x6 10' horizontals 1/2 OSB ply, ripped to 2'x8' lengths Should i notch the 4x4 vertical posts, then fit the 2x6's in the notches? ...
I'm planning to build a shelf in the garage, 22" deep and about 16' long. The back edge and one side will be supported by wall cleats, with 2x3s under the other edges. I'd like to support the front ...
I am hoping this isn't too wide of a topic since garage storage can vary greatly from person to person depending on what's being stored. In my case, I will be storing power tools like my circular ...
I want to use a french cleat to hang some basic open cabinets in my garage. I've seen recommendations anywhere from 3/4 to 1 1/2 inches thick, but nobody seems to be talking about weight. Is there a ...