I bought a Bosch PSB 650 RE Impact Drill and I have some question about how to use it for driving screws. I know it's not its primary function but for a few screws here and there it should work. I ...
I recently bought a $35 cordless screwdriver that came in a suitcase with screwdriver bits. I was in shock when the Pozidriv bit splintered after screwing only 3 1-inch screws in the leg of an ...
Background I would like to build picture frames, where there on the back is a hole with 18mm in diameter and 7mm in depth. In the hole will I glue a 2mm metal plate. On the wall would I like to ...
I have a predicament, I am putting up a shelf into the wall. The wall is plaster, and then hollow and then concrete. I have screws with toggle bolts on them. The 2 inch screw with the toggle bolt ...
I have a dremel, and I want to know if the drill bits that came with it are good enough to drill out a screw in my shower faucet. The shower faucet handel is broken and the screw is stuck in the ...
I want to purchase DeWalt 18V Cordless Drill/Driver from USA where electricity standard is 120V - 60Hz and use it in my country with transformer where standard is 220V-230V - 50Hz but there will be ...
It looks so easy on the DIY programs, but I battle to insert screws using my drill. The screwdriver bit keeps slipping out, and it damages the screw head. Is there a neat trick for this? Should I ...