The tag has no usage guidance.

learn more… | top users | synonyms

0
votes
1answer
36 views

Best way to fix excess stain on hard wood floor? Or just poly it?

I stained our hardwood floors one week ago and have let it dry but unfortunately all of it wasn't absorbed. I didn't notice the excess until a few days after I let it dry, and it's quite noticeable: ...
0
votes
1answer
93 views

Sanding between boards for smooth finish

I was following the guide at http://www.familyhandyman.com/walls/how-to-build-a-wainscoted-wall/view-all Basically, my issue is that the vertical stiles don't match up exactly with the horizontal ...
1
vote
2answers
206 views

How do I remove painted knockdown texture?

We scraped our popcorn ceilings and had somebody do knockdown texture in the whole house. Problem is, that when the guy went to prime over the texture, some of the texture started peeling off on the ...
4
votes
3answers
767 views

What would cause a Varathane EZV sander to rip the sandpaper?

I have recently been appointed FSA at a Lowes store in Allen Park Michigan. I was ask if i could find out why the Varathane EZV sander was ripping the sand paper. My knowledge on the subject is ...
0
votes
0answers
31 views

Wood frame door and window repair. Steps by step answers please. In Ecuador

These are the wood parts that have been very badly damaged by sun and water. How can i restore them to the natural color they had. Id like step by step information please. Also i am in Ecuador so some ...
1
vote
2answers
61 views

Cleaning up very old oak and other hardwood roof beams

I am building a stone barn and have just acquired an assortment of very old oak and other hardwood beams (with nails, dirt, the lot) to be used to construct the barn roof. A lot of this wood is filthy ...
0
votes
1answer
81 views

What's the name for this very thin metal sanding disk for use in a drill?

I have a sanding disc that attaches to my drill, and i'm struggling to find a replacement. Does anyone know what it's officially called? I reckon it's about 180 grit. It's about 127mm external ...
2
votes
1answer
118 views

How should I sand before the final coat of polyurethane?

I have applied 3 coats of poly so far. I'd like to smooth out the surface before the final coat. What type of sander should I use: Square Buff Floor Sander , Random Orbit Floor Sander , or just a ...
1
vote
2answers
154 views

Sanding screen vs Sandpaper for hardwood floor

What are the advantages and disadvantages of using a sanding screen vs sandpaper when refininshing a hardwood floor? When would you choose one over the other?
1
vote
3answers
681 views

Fix bad drywall mudding/paint

For my first-ever drywall mudding attempt, I (predictably) messed up. Mudded the walls (three coats), then added primer (two coats) and semi-gloss Behr paint (two coats). Reinstalled my lighting and ...
1
vote
1answer
123 views

How to even out the colour on wooden stair treads

I am currently renovating my staircase, and I want the treads of the stairs to be stained wood while the remaining of the staircase will be painted white. I have stripped the old paint of the treads ...
2
votes
2answers
757 views

What's wrong with the polyurethane on this hardwood floor refinishing job?

This is basically what I've done so far: I sanded the floor down to 120 grit with a drum sander (did a pretty good, time consuming job) Put 1 coat of polyurethane down - these problem-spots soaked ...
16
votes
8answers
90k views

What grit sandpaper should I use between coats of polyurethane?

I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...
2
votes
1answer
507 views

Why is sanding required between layers of lacquer paint?

Some context for the question in the title: After years of fixing stuff around the house, I've developed a chronic form of sinusitis - the minimal amount of dust is enough to set me off. I do use a ...
1
vote
2answers
135 views

How concerned should I be over scraping/sanding a small area of lead paint

We removed a shelving unit in our kitchen that was attached directly to the wall. We intend to paint the entire room but the cabinet was on top of many layers of flaking old paint. The house dates ...
1
vote
2answers
136 views

Can buffing and sanding attachments be used with a fixed speed powerdrill?

Have wondered about this possibility. I've seen some 'As seen on TV' ads where they sell all-in-one DIY power-tool kits which can act as a drill (reversible), power screw in/unscrew, hammer, buffing, ...
0
votes
0answers
92 views

Repairing rust damage and dents on my standby car

My standby car has got some nicks and minor small dents. Also there is some rust damage on two of the doors and part of the fender, usually spots where dew drop collects. At some places the rusting ...
2
votes
1answer
36 views

Should I be concerned about respiratory hazard from leftover/lurking silica sand from abrasive blasting (sandblasting)?

I know the media itself is a respiratory hazard while blasting (I'm told the silica sand itself breaks apart from the blasting and becomes dust-like). The area will be ventilated. However, I worry ...
2
votes
4answers
85 views

Non-sanding solution to get old pen markings out of wood?

My wife and I have a toddler who is ready to graduate to a big boy bed, and her parent's handed us down a twin bed that they've had in storage for years (woo hoo). The problem with it is that someone ...
5
votes
3answers
13k views

Is it necessary to sand before the last coat of oil paint?

When I'm painting high-gloss oil-based on woodwork (architraves, skirtingboards, windows), I have been following the tin's advice and sanding between all coats. I don't resent sanding after the ...
6
votes
1answer
145 views

What do the letters mean in sandpaper grading?

I have a set of sandpapers that has the following papers: 60 AN 100 GB 120 DN 180 FB All have the marking S/C/W/P paper T9 C Closed. These are all paper sheets. I know that the number is the grain ...
1
vote
1answer
741 views

When is it ok to sand against the grain?

Everything I've read says that you should always sand with the grain of the wood. What if it's impossible to sand with the grain? For example, I'm installing a brand new stair post - the kind with the ...
3
votes
0answers
35 views

How would I reverse yellow stains resulting from sealing a marble table top?

I sealed a new polished marble table top with a granite sealer that also works on marble. The discoloration is slight, but I'd like to remove it. What's the best way to do this? I've read about ...
5
votes
3answers
2k views

How soon can we stain a freshly-sanded deck after it got drenched in the rain?

My family and I are refinishing our deck. We live in area with wild weather so, even though it called for a week of sun, immediately after finishing sanding our deck (to a very beautiful underneath) ...
2
votes
1answer
411 views

How can I get replacement floorboards to match existing floorboards?

I've just moved into a 1930's house and have started work on restoring the original floorboards. I had to replace around one third in each room with new boards from a local timber yard. After sanding ...
0
votes
1answer
55 views

Using a flap sand disc to remove the finish from a closet door

This is related to something that I am working on, described here: Closet doors makeover Is it possible to remove the existing finish with a flap sand disk like the one below ? I have tried my ...
2
votes
2answers
1k views

Can I put a sanding drum in a routing table and use it like a spindle sander?

If I mount something like one of these: in a router in a router table, have I just created a spindle sander, or are there other differences in how they work? If you've already got a router, what ...
0
votes
1answer
58 views

Termite leaving sand on wall

We have termites problem in our house. And its getting worse day by day. We keep cleaning the wall everyday but still the problem of this sand termite exist. Please if anyone know how to keep them ...
0
votes
2answers
352 views

How can I transition between rooms when refinishing hardwood floors?

I'm planning to rent a sander and refinish the ugly floor that is the darker floor in the photo. I'm also planning to pull up the carpet which has nice hardwood under it in good shape (no refinishing ...
0
votes
1answer
218 views

Correct Sander Markings on Wood after Stain has properly dried

I re-processed my doors, and got to the third layer of stain. Unbeknownst to me,I had terrible sanding marks in my doors which I can see clearly through the third. Is there anyway to fix this without ...
0
votes
1answer
79 views

When does sanding(smoothing out wood surface) sensibly apply

I know I can smooth surface right after stripping is done. And I read somewhere that I can choose to perform smoothing step after pre-conditioning step instead. What I would like to know is if I can ...
0
votes
2answers
478 views

How do I stain/paint Ikea birch Wardrobe pieces ebony?

I don't like the Birch color much but I got a couple of those to use but would rather have the darker color. How do I go about making this change without ruining the wardrobe or the pieces please?
3
votes
3answers
186 views

How smooth should I sand a wall

I removed old paper from the wall and want to paint it new . Before doing it I guess I should sand the whole wall so that it's smoother and for that I'll use a dry-wall sander. The question is which ...
1
vote
1answer
3k views

What should I do about streaks in my finish?

I just stripped, sanded, stained & then applied fast-drying oil-based polyurethane to my hardwood table. All went well until I sanded the second coat of polyurethane with 220 grit sandpaper. The ...
1
vote
1answer
520 views

Will the shiny and scratched appearance after sanding between coats go away after applying another coat of polyurethane?

I have a table that has a veneer inlay that my grandkids put huge scratches in. I decided to sand it and coat it with polyurethane. Long story short, I even ended up adding stain. The sanding block ...
7
votes
6answers
6k views

How to SLIGHTLY widen bored hole in 2x6

I'm making a stand-alone pullup bar and I bored 1 1/4" holes in 2x6's for my 1" galvanized pipe (1 1'4" outside) to slide through. Only the pipe is definitely 1 5/16" (thank you, guy at Lowes) and I ...
1
vote
2answers
327 views

Paint a rusty hinge without sanding?

If I use primer on a rusty hinge, can I paint it and get away without sanding it first? Photo:
0
votes
1answer
281 views

Do I need to sand oil-based lacquer before painting?

Getting ready to paint fireplace surround, which currently has oil-based lacquer that turned yellow. Do I need to sand it before applying latex paint, or can I use a brand name cleaning product to ...
6
votes
4answers
3k views

How to rescue exterior door paint job?

I have a newly installed exterior metal paneled door that was still dirty when painted. Also embedded in the paint job are bits of foam rubber from the brush, lint from a paint roller and hair from an ...
4
votes
1answer
162 views

What painting equipment is needed to restore a derelict wooden house?

The exterior walls are in a very bad shape, and the whole house needs to be painted. It looks like this: What equipment should I get to prepare the walls and paint them?
1
vote
2answers
1k views

How do I fix scratches from sanding drywall?

I've never sanded drywall/spackle before so I don't know what is acceptable or not. I'm remodeling my bathroom and have put down a few layers of spackle. Everything looks good and I just wanted to ...
2
votes
0answers
83 views

Electricians came in last week to drill and install pot lights.. are they in charge of plastering and making sure all is OK for painting? [closed]

So Electricans came in to install some pot lights. 8 per room. Some of the pot lights have cracks around the drywall where the hole was drilled. Some cracks they created while drilling the holes were ...
5
votes
2answers
3k views

How can I plane the edges of plywood?

I'm working on an 8ft x 12ft climbing wall. I have 3/4 inch ACX plywood attached to a frame. Since the frame isn't perfectly square, the plywood overlaps on the edges (up to about 1cm) so I need to ...
1
vote
1answer
163 views

Can you fix scratches in Little Tykes furniture?

Little Tykes has thick plastic furniture and toys. Is there a way to make them look new? Buff, fill, what?
0
votes
1answer
182 views

How do I polish a marble table top?

I have an old 42" diameter round marble table top which I would like to restore. It is very dull and has deep scratches. On some of the edges, tiny chunks have come off. I would like to know if this ...
1
vote
3answers
140 views

How to sand wood without flattening it

I'd like to sand some wood planks on a rustic table to remove paint stains, but keep the rough wood structure (1-2 mm height difference). How can I do that?
3
votes
2answers
758 views

How do I know when to switch to a finer grit when polishing marble?

I am polishing a marble shelf with pads impregnated with a resin containing diamond powder (it has some advantages over sandpaper, but otherwise works in a similar way). I used grit 50 to remove ...
1
vote
2answers
940 views

Is it possible to use this reclaimed hardwood flooring?

I am planning on reusing some old hard wood flooring reclaimed from another parts of the house. I should note I have an old house that the original portion was built in 1760 with an add on done ...
4
votes
1answer
487 views

What's the significance of orbit diameter in a random orbit sander?

I've been looking at random orbit sanders and noticed that they have different orbit diameters, and some models even offer settings for it. Does the orbit diameter affect material removal, or ...
8
votes
2answers
855 views

How is sandpaper quality determined?

In chat today, Karl mentioned that there's a very large disparity in sandpaper quality. Now, I knew about grit differences (they refer to the fineness of the grain, iirc) but literal quality? So, ...