This is basically what I've done so far: I sanded the floor down to 120 grit with a drum sander (did a pretty good, time consuming job) Put 1 coat of polyurethane down - these problem-spots soaked ...
I don't like the Birch color much but I got a couple of those to use but would rather have the darker color. How do I go about making this change without ruining the wardrobe or the pieces please?
Will the shiny and scratched appearance after sanding between coats go away after applying another coat of polyurethane?
I have a table that has a veneer inlay that my grandkids put huge scratches in. I decided to sand it and coat it with polyurethane. Long story short, I even ended up adding stain. The sanding block ...
I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...