I know I can smooth surface right after stripping is done. And I read somewhere that I can choose to perform smoothing step after pre-conditioning step instead. What I would like to know is if I can ...
I just stripped, sanded, stained & then applied fast-drying oil-based polyurethane to my hardwood table. All went well until I sanded the second coat of polyurethane with 220 grit sandpaper. The ...
I'm planning on applying polyurethane to a pine bench I've finished staining. I decided on foam brushes for application, but I wasn't sure what grit sandpaper I should use between coats. Is 400 good ...