I re-processed my doors, and got to the third layer of stain. Unbeknownst to me,I had terrible sanding marks in my doors which I can see clearly through the third. Is there anyway to fix this without ...
I'm working on an 8ft x 12ft climbing wall. I have 3/4 inch ACX plywood attached to a frame. Since the frame isn't perfectly square, the plywood overlaps on the edges (up to about 1cm) so I need to ...
I am planning on creating a table made out of recycled wood planks and I am wondering if it is too ambitious to hand sand the wood planks without the use of machinery. I am on a budget and am ...