The exterior walls are in a very bad shape, and the whole house needs to be painted. It looks like this: What equipment should I get to prepare the walls and paint them?
I'm working on an 8ft x 12ft climbing wall. I have 3/4 inch ACX plywood attached to a frame. Since the frame isn't perfectly square, the plywood overlaps on the edges (up to about 1cm) so I need to ...
I need to know how to take the old sandpaper off a palm sander (Makita model B04553). It is not mine so I am unsure, but there are four latches that I have lifted, thinking that it will loosen and ...
I am planning on creating a table made out of recycled wood planks and I am wondering if it is too ambitious to hand sand the wood planks without the use of machinery. I am on a budget and am ...
A friend just gave me over a hundred 6" flat hook and loop disks. The only problem is, I've got a 5" orbital sander with dust collection which uses perforated sanding disks. Can I use these together ...