0
votes
1answer
185 views

Is it okay to use brass inserts in a plastic reverse osmosis pipe?

I've learned that letting metal contact reverse osmosis filtered water is generally a bad idea as it corrodes the metals and leaches them into the clean water supply. However, I'm having a hard ...
0
votes
2answers
5k views

Why is there a copper wire attached to this water pipe?

The outdoor faucet was turned on today(45 degrees), shortly after we discovered a leak in the house. We're not sure if the faucet broke or the pipe fractured/burst. After pulling back the drywall we ...
2
votes
1answer
326 views

Is this water heater drain configuration safe?

I've just replaced my water heater and for the first time my house has a water heater drain pan. The washing machine waste line is nearby and I'd like to connect the water heater drain pan to this ...
2
votes
1answer
498 views

Can replacing a T&P valve be done as DIY by a home owner?

I want to replace the T&P valve on my gas water heater since it is dripping water all the time. I talked to a couple of people such as my friend and a salesperson at a Home Improvement Store. They ...
3
votes
4answers
17k views

How do I pressure test a natural gas line and what do the valve pressure ratings mean?

I'm planning to add an appliance to my house, and will want to do a pressure test of the newly installed gas lines. My main shutoff says 175 PSI, but most of the appliance valves say either 1/2 or 5 ...
2
votes
2answers
3k views

Is it safe to shut off cold water entering water heater?

I have a pretty bad situation at my place. I have a leaky shower faucet which has gone from drips to a steady stream. I calculated the flow at .3 gallons per minute. My very old home has no private ...