Suppose I want to reduce risk of a circuit breaker malfunctioning and failing to disconnect a shorted circuit. What if I install two identical breakers sequentially (one after another) so that if one ...
If not, how do you correct it, or can it be moved without making too much work?
I have a 3 phase 15KW generator with four wires. I want to use it as a standby generator for my house. My house uses 1 phase 220 volts on two wires (no ground as the house is quite old). I have a 3 ...
I need to extend a USB device from a corner of my room to the above the fireplace. Since I'm already going to be installing some HDMI and audio cables through the wall, I'd like to have my USB device ...
In installing a dishwasher on a dedicated 20amp circuit on 12g wiring, I've come short about 5 feet to run a line. I have some surplus, heavier, 10g wire. Would it be safe to install a junction box ...