To be specific, we recently had some electrical work done. The electrician added a second panel. He left without labeling anything. So today I've been testing outlets and switches trying to figure out ...
Suppose I want to reduce risk of a circuit breaker malfunctioning and failing to disconnect a shorted circuit. What if I install two identical breakers sequentially (one after another) so that if one ...
I have a circuit breaker that keeps tripping. When i try to reset (close) it, it immediately jumps back to the open position with a noise that sounds a little scary. I have now stopped trying to do ...
I have inherited a house that has been in my wife's family since 1860. I do not know when it was electrified, but it seems to have skipped knob and tube. There is a lot of fabric-covered wire, and ...
We bought a home a few months ago, and the electrical panel (and subpanel) are completely unlabelled. We have no way, short of flipping breakers, to know what breaker powers which fixtures. Is there a ...
Location: California | United States I'm certain I'll need a licensed electrician for this but wanted to get thoughts on what could be going on. I recently noticed that power remains on in my house ...