Can I use an old aluminum road sign as a replacement floor for my hot water heater closet? The old floor is rotten and has some give to it right where a portion of my hot water heater sits, and my dad ...
I have a Whirlpool front-loading washing machine (not sure about the model at this moment - I'm slacking off at work right now ;P). A month ago the torque transmitting belt went off. I put it back on ...
I have a few small hand-carts. One of them is the two wheel hand-truck/dolly, and one is a larger one on four wheels with an upright handle. Both have leaky tires. Some of the tires have a slow ...
My townhouse has a downflow 1994 Rheem 2.5 ton HVAC unit on its roof (combines both A/C and heat). We have had two issues with the unit and have been in the townhouse for a little under two years. In ...
I have an old RH&CO mortise entry lock and the drilled, split spindle is broken. I cannot seem to find the 3" drilled split spindle with a hook at the end anywhere. I have tried local hardware ...
Much to my displeasure, my (wife's) cat has torn up a large section (2'x6') of carpet. Eventually we would like to sell the house and this would definitely be noticed. Is there any way to repair the ...
One of the tiles adjacent to my kitchen floor fell down. The tile itself is still in good condition but I'm not sure how to properly reattach it. I'm guessing it would be something like: ...
I'm getting ready for my first major DIY project (about a week away). Here's a summary: We confirmed the presence of Asbestos in our house heating vent insulation and acoustic ceilings. We're ...