I have wood screws whose heads are stripped from trying to remove them with a drill. The drill (or screwdrivers) can't grip the heads anymore. What can i use to remove these screws easily?
I often come across screws that just won't budge with a manual screwdriver or even a driver bit in a drill. They are of different screw types and heads in a variety of different materials. What are ...
What is the best way to remove black mold from wood? Specifically, the mold on my back porch is black mold. Is the best option to use something like Kilz over it?
My attic has tongue and groove planking down as the floor, and I need to do some work up there. I'd like to only remove a couple planks in the middle of the field, rather than pulling up half the ...
Most of the taps in my new house are fitted with so-called "anti-vandal" screws in the tap heads, as shown in the image. These screw into the tap head to tighten them onto the stem. I can't remove ...
The previous owner of my new house installed ClosetMaid shelves in the closet. I removed the shelves, but had a really hard time with those clips and brackets (pictures attached). Seem like they were ...
Folks, I need to remove an old kerosene storage tank (for central heating) from my in-laws back garden. The tank is moulded plastic, and has a 1,000 litre capacity. The access point it was ...
My bedroom has a very nice looking flush mounted ceiling light with a glass dome. However, all the bulbs have gone out and I cannot get the glass out to replace them. I'm 5'4" and standing on the ...
We want to get rid of the texture on our ceiling. It's a very ugly stipple effect. However, there's a foot and a half of insulation over this ceiling. Knocking it down to install new drywall is ...
In about 2 weeks I'm doing a little cathartic destruction of a deck on the back of my house. The deck came with the house and has suffered YEARS of neglect, it's beyond repair, built incorrectly, and ...