A contact device installed at the outlet for the connection of an attachment plug.

learn more… | top users | synonyms (2)

1
vote
3answers
834 views

How do I wire this switch/outlet combo?

This 5 minute task has kept me busy for an hour. Old switch/outlet combo melted. Replacing with gfci combo. Red/White pair is the line. Orange/White pair is the load to the light. Strangely, ...
3
votes
1answer
285 views

How do I troubleshoot a newly installed non-working outlet?

I recently spent several frustrating hours trying to figure out why an outlet on a new branch circuit would not power a load even though there was proper polarity at the outlet, my non-contact voltage ...
2
votes
1answer
48 views

Outlets that seem to be on same circuit, but not behaving that way

I'm trying to install a GFCI outlet in my kitchen. My understanding is that you can install one GFCI on the circuit and this will protect all of the other outlets. This is assuming that the GFCI ...
1
vote
1answer
45 views

Why doe the AFCI immediately trip?

I move an outlet 12" and rewired it the exact same; now the AFCI trips immediately, when turning the power back on. It's a 14/ wire in sequence with a pig tail to the outlet. Any help would be ...
1
vote
1answer
122 views

Correct way to rewire for a ceiling fan + light from a switched outlet

I want to know if this is the correct way to do this. There is a switch that controls a single receptacle in a double receptacle outlet across the room. Power comes into the switch box via 3-wire ...
0
votes
1answer
47 views

Outlets and lights don't work but plug-in receptacle tester indicates all ok

I have two bedrooms and a shared bath that are on one circuit. Through some initial remodeling/updating, all of the outlets were replaced (3-prong), and all of the light switches. All is fine in ...
0
votes
1answer
79 views

How do I wire a 4 prong plug into a an old receptacle with only red and black wires with metal conduit into metal box?

I am trying to wire for a 4 prong plug into a an old receptacle pre 1972 with only red and black wires with metal conduit into metal box. It has been used since 1964 hard wired 220B with metal ...
1
vote
0answers
34 views

i have a hot tub installed on a gfci receptacle but when I plug something in that receptacle it doesn't work?

My hot tub is connected to a gfci receptacle but when I plug something in that receptacle it doesn't work? Is this normal?
1
vote
0answers
1k views

2 hot wires into light switch and no neutral

I recently bought a home built in 1908 and I've found some funky electrical issues - such as the entire main floor on one 30 amp circuit. This morning I went down to the bathroom on the main floor and ...
1
vote
0answers
127 views

What could happen if a 240 stove cord was improperly installed and then stove was plugged in to the receptacle?

I think my new stove cord was installed incorrectly — after being plugged in we heard a ((whooooaamp)) sound and all the lights in the house flickered, now none of my 220 appliances will work ...
1
vote
0answers
715 views

Wiring Leviton Timer to Bath Fan and Switch to Light

I am a DIYer with a basic knowledge of electrical wiring. I am having trouble wiring a bath fan to a timer and light to a switch. I can get get power to one or the other, not both. Here is the ...
0
votes
0answers
18 views

GFCI receptacle

I just installed a GFCI outlet in my bathroom thats directly connected to the light fixture switch. when i turn power back on the light fixture isn't getting power and the outlet wont test. But The ...
0
votes
0answers
33 views

Estimating max wattage

I live in an apartment in South Korea. The main circuit breaker in the apartment looks like it's 30a 220v, with four individual 20a switches running to different parts of apartment. All the outlets ...
0
votes
0answers
81 views

Converting a non-switched outlet to switched with an already switched outlet?

I have two outlets one on each side of a gas fireplace both are on the same circuit. One of the outlets is controlled by two-switches (the one farthest from one of the switch). The other outlet closer ...
0
votes
0answers
44 views

Can you have a outlet in a junction box?

I have a large in wall metal junction box. about 14-15 inches wide. but 14-15 inches tall. can i install a outlet inside the junction box? it needs to power a transfer for a intercom system.
0
votes
0answers
58 views

Moody electrical outlet

The sink disposal came unscrewed, leaked, and shorted the unit. It died. I replace the disposal and plug it in. Nothing happens. The breaker is not tripped. The new disposal turns on when an ...
0
votes
0answers
308 views

How can I rewire my bathroom fan (with light and heat), light, and receptacle?

I currently have a 3-gang box that houses a ceiling light, fan (with heat and light), and an outlet. I would like to move the outlet and ceiling light switch to one wall in a 2 gang box and leave the ...
0
votes
0answers
116 views

What could cause my newly installed electrical outlets to not work?

I replaced several electrical outlets in the house today and one outlet is not working at all, and the other two outlets only have one of two plugs working. I've looked over them again and all wires ...
0
votes
0answers
56 views

Outlet trips GFCI outlet

Replaced 15v outlet with another basic one. All seemed to go well during install, but after it was over, the gfci outlet trips when I place a reasonable load to it. When left alone, power flows ...
0
votes
0answers
78 views

No power to lights or receptacles yet meter shows 120 volts at breaker - 2 separate wires

Outlets and lights are not working from 2 separate wires coming out of my breaker box. Both main wires coming into the box show 120 volts each and the 15 amp breakers read 120 volts where the wires ...