1
vote
1answer
28 views

Do I need to 'burn out' the LP in the gas lines prior to swapping out an appliance?

I need to replace the flexpipe between my steel pipe and the propane insert. The one installed is too short. Alas, there wasn't a shut-off installed at the fireplace, so I needed to shut off the LP ...
3
votes
2answers
183 views

Can I use 1/4 inch copper tubing with a compression needle valve to run propane to a gas light?

Can I use 1/4 inch copper tubing with a compression needle valve to run propane to a gas light? I am worried that gas would leak from the compression fitting
0
votes
1answer
91 views

How do I plumb LP gas lines for multiple things? Tiki torches, grill, smoker

I am an experienced DYIer and am starting my research on building my deck. I would like to plumb it for eight tiki torches, a grill and a smoker. I have experience plumbing gas, I plumbed my last ...
-4
votes
2answers
97 views

How can I temporarily reconnect a fuel tank? [closed]

I am in the process of purchasing a home heated by propane..someone has removed the pigtail from the tank to the regulator..the tank fitting appears to be a quick disconnect type unfamiliar to me..the ...
1
vote
2answers
8k views

How to run an interior gas (LP) line

I need to run a gas (LP) line from outside the house to a cooktop in the kitchen. Here's what I think I need to do: drill a hole in the exterior wall and the header (from the attic) of the same wall ...