I'm about to buy a cordless tool set in which the tools all operate off the same form-factor battery. The batteries come in several different chemistries and I'm wondering which type is better for ...
Are there any cordless powertool systems (e.g., drills, drivers) that have a corded battery option (i.e., an adapter that fits where the battery would normally go that can be plugged in)? I've used ...
It's 38mm thick. Next week I will need to cut it along a straight line, and I would like the cut to be as straight and clean as possible. What tools do I need to do this ?
I want to use solar panels to create a power backup for a router(9V, 1A). I'm aware I'll require solar panels and batteries but am not sure how to choose suitable ones. Please help suggest me on ...
I order this 3/32 slotting bit from Amazon. Shank size 1/4, depth of cut up to 9/16. I only need 3/8 depth (slightly over is ok), but I could not find the right bearing. There are router bearing ...
I'm in need to buy a rotary hammer to make some holes in a slab about 12 cm thick of armed concrete. The holes will be between 5 and 10 cm in diameter, so I will have to hammer a round opening instead ...
I'm looking to buy a new drill, but all of them seem to be corded or cordless. Are there drills that can either run cordless, or off the mains, depending on whether it's plugged in? It seems that ...
I wanted to use an old electric driller that it's battery has worn down and i couldn't find a new battery. on the battery it says 7.2V. So i took a AC-> 7.5V DC 1A Transformer and used it in place of ...