Or vice-versa. As best as I can tell, the impact driver is very good for most any type of screw going through wood. When would you use a drill (with screw bit) instead?
I'm about to buy a cordless tool set in which the tools all operate off the same form-factor battery. The batteries come in several different chemistries and I'm wondering which type is better for ...
Are there any cordless powertool systems (e.g., drills, drivers) that have a corded battery option (i.e., an adapter that fits where the battery would normally go that can be plugged in)? I've used ...
When doing many DIY projects there's a strong need to protect hands against cutting by sharp part edges. Gloves seem a natural solution. However recently I was mounting a countertop and wearing ...
It's 38mm thick. Next week I will need to cut it along a straight line, and I would like the cut to be as straight and clean as possible. What tools do I need to do this ?
I want to use solar panels to create a power backup for a router(9V, 1A). I'm aware I'll require solar panels and batteries but am not sure how to choose suitable ones. Please help suggest me on ...
I order this 3/32 slotting bit from Amazon. Shank size 1/4, depth of cut up to 9/16. I only need 3/8 depth (slightly over is ok), but I could not find the right bearing. There are router bearing ...
The task I am replacing my kitchen sink. The existing sink sits in a rectangular hole (with rounded corners) in the kitchen worktop. The worktop is about 1½" (40mm) thick and is made of some kind of ...
I'm in need to buy a rotary hammer to make some holes in a slab about 12 cm thick of armed concrete. The holes will be between 5 and 10 cm in diameter, so I will have to hammer a round opening instead ...
I'm looking to buy a new drill, but all of them seem to be corded or cordless. Are there drills that can either run cordless, or off the mains, depending on whether it's plugged in? It seems that ...