Very simple question really - I have a floating wooden floor and a raised stone hearth in front of the fireplace. I want to run some cables along the edge of the hearth and I need to lift the floor ...
I order this 3/32 slotting bit from Amazon. Shank size 1/4, depth of cut up to 9/16. I only need 3/8 depth (slightly over is ok), but I could not find the right bearing. There are router bearing ...
I'd like to purchase a Ridgid R4510 table saw, but I want to make sure I can mount a router under it. Should I be concerned with whether this specific table saw is going to allow it or do pretty much ...
One of the answers for another question of mine recommended using a finishing bit in my router to leave about 1/16" protrusion remaining to be sanded. When I search for "finishing bit" though I can't ...
If I mount something like one of these: in a router in a router table, have I just created a spindle sander, or are there other differences in how they work? If you've already got a router, what ...