We just replaced the whole system in our toilet. It use to have a flushing ball valve and it worked great until it broke. It flushed everything down the first time no problem. Now with the new ...
I have Zurn crimp rings and the Zurn ratchet tool. I was wondering what brass fitting I can use. Do they need to be Zurn fittings or can they be any crimp fittings? For example, can I use ...
I have a new stainless steel sink and installed a Kohler sink flange following their package instructions. The instructions for putty only stipulated "apply a ring of putty." However, subsequently, I ...
I have a slow-filling cistern and, having disassembled all the pipes inside I've identified a ripped seal. Assuming that I didn't cause that myself just a moment ago, I'm hopeful that replacing it ...
We are rebuilding a bathroom in a house in Long Island, New York. We would like to replace this external tub drain with the same. It has no identifiable markings. We need the make or model, or even ...
I need to seal a broken plastic ring, but it needs to stay black - all the epoxy putties I find are grey or white. Thanx!
I just installed a new tub fixture set: There are two controls - one for temperature and one for volume. The large handle is volume. When the diverter valve is engaged the shower sprays properly ...