I just pulled out the washing machine the old owners "kindly" left us to find a hole where the wall meets the floor. It's approximately 80mm x 50mm and goes down approx 100mm - below ground level - ...
Can I use an old aluminum road sign as a replacement floor for my hot water heater closet? The old floor is rotten and has some give to it right where a portion of my hot water heater sits, and my dad ...
(My issue is kind of like this question but more of a missing chunk than a thin crack.) I have a concrete patio in the front of my house that was fixed by a previous owner after a bottom chunk broke ...
I've currently got an oldish furnace (early '90s Lennox), with an A/C system. The blower motor burnt up on me last week, and I just had it replaced. It turns out that the reason for the motor going, ...
I have screw holes which were put in to support a curtain rail. The curtain's been pulled out a few times by accident, and now the screw holes are crumbling and I don't know how to repair that portion ...
In about 2 weeks I'm doing a little cathartic destruction of a deck on the back of my house. The deck came with the house and has suffered YEARS of neglect, it's beyond repair, built incorrectly, and ...