For questions regarding the application of paint to a surface, including preparation and cleanup.

learn more… | top users | synonyms

0
votes
0answers
22 views

repainting old plaster - how much to scrape?

Plaster (~1/4" thick) over wood lath, probably c 1920's. There appear to be 2 coats of paint, possibly 3. The paint had peeled in a few places, at least partly due to water from a long-ago roof ...
0
votes
3answers
90 views

Painting glass opaque black

What is the best way to paint a large piece of glass (4ft x 6ft) opaque black? I was thinking about using PlastiDip, any opinions? I considered film, but it's hard to find decent priced film that is ...
0
votes
1answer
123 views

How long does concrete dust take to settle

I'm getting some wiring done and having the electrician chase the new wires. The walls are concrete so I know that this is going to make a huge mess and need serious work after the electrical stuff is ...
0
votes
1answer
32 views

What should I do about mold in the corner of a bedroom?

I have what I think is a cold corner in a bedroom. Before we moved in, there was wall paper up for a number of years (as per the house selling photos and when we moved in, house was for sale for 2 ...
3
votes
1answer
141 views

Fill groove in MDF door

I'm painting some MDF doors, and noticed that someone appears to have run a stanley knife over one of them, perhaps whilst removing them from their packing. I've sanded the area back as much as I can,...
0
votes
2answers
27 views

Cleanng a brush used for water-based paint, with soap or not?

After painting with water-based paint I usually clean my brushes (or rollers) by simply rinsing them under running hot water (as hot as my hands can take) straight from the faucet. After thorough ...
1
vote
2answers
59 views

Painted sample areas have different sheen than the rest of the wall

I recently finished my basement. Had the drywall textured. Painted three sample areas of different paint colors I was trying to decide on. I decided on one and got the paint from a different paint ...
1
vote
3answers
651 views

MDF (particle board) edge sealing for smooth painted finish

I am working with CNC routers and a lot of MDF, which is great UNLESS you need to paint the edges which are furry in some spots and all open and porus everywhere else. I build plinths that need to be ...
2
votes
4answers
142 views

What type of brush to use with polyurethane?

I used this brush and got good results but I was wondering if there is even better. Are there brushes that are made specifically for polyurethane?
0
votes
1answer
26 views

Radiator rust recovery

I would like to repaint just the fin half of this radiator that is rusted. I would like to know of there is a special treatment due to rust that I should do. I do plan to sand the rust with a grinder ...
1
vote
3answers
41 views

Primer and paint for radiators

I need to repaint a part of my radiator. I have already sanded the tarnished area with a grinder and a flapdisk but not the whole area (half of a fin) I'm getting ready to refinish, IOW most of the ...
0
votes
1answer
210 views

Can POP (Plaster of Paris) and Paint done without waiting

I am undergoing paint in my house and POP at same time. A guy did a POP in most of the rooms. Now after how much time i allow a painter to start doing a putty and paint on it or should they wait for ...
2
votes
3answers
421 views

Should I smooth out or apply knockdown texture after popcorn ceiling removal?

I am removing non-asbestos popcorn ceilings on a 2200 sqft house. All walls in the house are knockdown texture. After the popcorn comes off, I can either smooth out the drywall or apply knockdown ...
1
vote
3answers
77 views

Paint and mold prevention

Which application produces the best results, with respect to mold prevention: An all-in-one paint with primer Apply plain primer, then regular paint Is using either process better for mold and ...
0
votes
1answer
47 views

Need help painting a desk top made out of MDF

I recently put together a quick desktop that I want to attach to a treadmill desk I am working on. I made it out of MDF. I want to paint it Matte Black! My question is how can I paint it in a way that ...
0
votes
0answers
80 views

Why isn't Floetrol (or the same chemical) just added to paint by the manufacturer

I keep hearing how adding Floetrol gives much better results when painting mouldings and doors etc. As gloss paint is almost always used for these surfaces, my question is: why does gloss not just ...
2
votes
1answer
55 views

Painting old plaster walls

I have old plaster walls in my house that had been walpapered. I have removed the wallpaper and cleaned the walls. I am ready to prime and patch, but am not sure what kind of primer to use. The ...
1
vote
2answers
532 views

Avoiding Satin Paint Streaks with Roller

I have a wall that is 8 feet tall and about 20 feet wide with a strip of chair rail that runs the length of the wall. I used Sherwin Williams satin white paint. I gave the wall a light sanding with ...
0
votes
0answers
53 views

interior vinyl wall paint

because my son is autistic and is likely to draw on the walls with whatever is at hand we had every room painted with vinyl paint to be washable. 18 months later anything ie sofa you put against a ...
2
votes
1answer
73 views

Covering some smelly paint

Recently (4 days ago) I replaced a solid radiator with a column one. On removing the solid radiator the wallpaper was as you might expect an old colour. I managed to find an opened tin of paint the ...
4
votes
8answers
2k views

How do I get rid of this ceiling finish and what is its name?

I am looking for an easy method. Common sense tells me that something like sanding must be used. Any special tool that can accelerate the process ? The structure the roof is shown below. I might ...
2
votes
1answer
97 views

How do I repaint a bathroom that was originally painted with oil (possible lead) then latex?

The home was originally constructed in 1955. Since I have no way of knowing when the original paint job was done on this bathroom, I cannot easily determine if the old oil-based paint contains lead or ...
0
votes
1answer
38 views

Remodeling an old mechanic's garage into a conference space

I am currently remodeling an old garage (Lube Center) into a conference space. Right or wrong, this is what I'm doing. I have already installed insulation with paper backing on the ceiling (Open ...
2
votes
1answer
92 views

What's the best way to touch up spray paint?

Complete DIY newbie here! What's the best way to touch up something that's been spray painted? I have some MDF/wooden furniture (the type that comes flat packed) that seems to have been spray ...
1
vote
1answer
51 views

Painting on old lime plaster

I have recently stripped the wallpaper off the hall internal walls. The house is old (Edwardian) so has lime plaster underneath which is in good condition. I would like to paint directly on to the ...
0
votes
0answers
21 views

Weatherizing wood window frame in masonry opening

If I have a masonry (brick) house and I will need to fit a 2xX window frame in it for a new window. Assuming that I use regular SPF 2x lumber, and use aluminum flashing around any part of it that ...
0
votes
0answers
51 views

Is teak wood paintable?

Is there any particular steps I should follow when painting teak wood? Is there special paint and primer to use?
0
votes
2answers
228 views

Refurbishing badly painted, rusty radiator

I'm trying to refurbish a radiator which is in pretty poor shape. The paint was all cracked and yellowing, and having sanded it, there's rust patches underneath. It's been painted badly in the ...
0
votes
1answer
52 views

Should I immediately clean my paint sprayer after use?

I just purchased a Wagner ProCoat sprayer. Used it for the 1st time with Valspar Ultra Zero VOC paint from Lowe's. Do I need to clean it immediately? I'm gonna use it again next weekend. Is 1-week ...
3
votes
2answers
150 views

What can I mix with paint to avoid mold?

I am helping a friend painting his garage. He has lots of problems with mold because it's an underground garage. He already bought the paint. I know there are some additives you can buy at ...
0
votes
0answers
199 views

How to repair “textured” ceiling texture

I am in the process of making small improvements around the house prior to our starting to rent it out. A few months ago a bit of the paint on a small part of the ceiling in our master bedroom fell ...
0
votes
0answers
102 views

Painted drywall with spoiled zero-VOC paint. Does Bin Shellac work to seal mold/bacteria? Some posts say no

My mother painted drywall with “spoiled” zero-VOC Banjamin Moore Paint (Natura). It was 5-year old paint, which had been opened/used years prior without a problem. The result was serious allergies and ...
0
votes
1answer
43 views

Interested in home will mold problem . Can mold be in carpeting? Howe do i remove

Interested in purchasing a home that has been empty for several years. Has a little mold on upstairs walls able to take care of that. One room has ceiling repairs with mold. Can the mold go up into ...
0
votes
1answer
60 views

Painting Tape Application - One Foot Sections

I have read that one should apply painter's tape in single, one-foot sections instead of a long strip. The reason given is that when it is applied in one, long strip, the tape is stretched and won’t ...
0
votes
1answer
45 views

What type of product should I use to seal/protect the wood interior of a outdoor office?

I'm in the final stages of building an outdoor office (yay!). Here's what it looks like: The wood is supposedly "nordic spruce" according to the manufacturer. I'm planning to prime/paint the ...
1
vote
0answers
121 views

Best way to dry out wet, painted wood

So I just got this boat. It has a painted plywood roof, but it's been neglected for many years, and the paint has begun to chip/peel. Parts of the roof are a bit rotten, and most of it is damp when ...
0
votes
1answer
163 views

Painting Over Wall Blemishes

Album First Background: I have some walls that were once covered in wallpaper and my wife and I removed them when we bought our house. We then casually patched and sanded some of the blemishes left ...
0
votes
0answers
104 views

Preparing an old plaster surface for paint

I have two internal walls that I am repainting. Both were wallpapered, but stripping the paper off has revealed a load of old paint - I've got most of that off, but some is being rather stubborn. ...
0
votes
2answers
489 views

Do paint fumes affect electronics?

I'm planning on painting a home office but I don't want to have to move all my equipment out of the room. If I keep my equipment inside and move it all to the center of the room will the fumes affect ...
1
vote
1answer
40 views

painting process for outside wrought iron

I have just purchased new wrought iron rockers for my front porch. They will get morning sun so sun probably is not an issue. I want to add color to the rockers. What do you suggest? I'm sure ...
1
vote
0answers
125 views

How should I restore this painted sandstone bay window?

I have a bay window that needs some love. I think its sandstone and has had several coats of paint over the years. I've scraped all the paint off. Here's where I'm at: As you can see, it has a few ...
1
vote
1answer
31 views

attempting to paint over a darker colour of paint

trying to paint a bedroom, that has been papered and previously painted , but the paint won't stick to the wall , its all patchy I let it dry for a few days, tried again but the roller is just ...
1
vote
0answers
195 views

Refinishing Front (Fiberglass) Door Advice

I'm in the middle of refinishing my fiberglass front door. Definitely not going the way I've planned, but I'm hoping it may still turn out ok. :) What I've done so far: I used Citri-Strip Paint ...
3
votes
2answers
686 views

How often should I paint the exterior of my house?

We're about to have the exterior of our house repainted. How often should we expect the paint to last? Location: Metro Atlanta, GA Surfaces: Wood & Wood Composite Siding (Yes, I know it sucks) ...
2
votes
1answer
236 views

Paint peeling off layer of joint compound over plaster, am I in over my head?

I have no experience working with plaster walls. In the kitchen of a building I maintain, there are large sections of paint cracking off the walls. When peeled, I see several layers of paint (at ...
1
vote
1answer
123 views

Can you paint Dow THERMAX WHITE FINISH INSULATION?

Can you paint the insulation boards after installing them? This would be for an attic interior installation. Then could I skip the dry wall? How good would it look compared to drywall?
1
vote
1answer
196 views

Interior wall paint turned soft and gooey

A patch of paint next to the head of my bed has been slowly turning soft and gooey over the past several years and I don't understand why. There seem to be several coats involved, with a top layer of ...
0
votes
1answer
58 views

How can I get floor paint to stick better on our outside stairs?

We have stairs leading down to our flat which are outside and we have painted them a few times, but the paint doesn't seem to stick very well, and always starts peeling off. It mainly peels in the ...
0
votes
0answers
248 views

what I can do to cover these awful dark spots/streaks on the ceiling?

We are building a new house. Our ceilings are sheetrock. We primed and put 2 coats of flat ceiling white paint on them. There are very obvious roller & brush marks (dark spots) all over the ...
1
vote
2answers
330 views

Can I put one brand of paint over a different brand of paint?

I painted wood with Valspar satin finish paint, but I don't like the texture because it is rough. I was wondering if I can paint over it with a second coat of a different brand, colour matched and the ...